Darkened image
Hello. Monitor 1280x1024, square, LG, a few days began to notice that the image is darkened, the play was not very comfortable, and just while surfing the Internet have become tired eyes, before such was not at all. The dark unspoken, that is not a black screen. The brightness slider in power options disappeared, I tried to adjust the brightness via the NVIDIA panel but nothing really gave. What to do? To change the monitor there is no money.Magnum 500 wrote:
The brightness slider in power options disappeared
This slider has disappeared in the monitor menu or in the OS? Usually in case of failure of one of lamps of illumination - the Monitor test fails and the backlight does not work.
Often the monitors fail power supplies (swell, flow capacitors).
It is desirable to refer to a good service center. There cause will establish quickly and the price for repair call (Such monitors can now buy on average for 1000 rbl.). The only one I gave recently.
Ryazancev
The slider disappeared from the control panel - power options, at the bottom there should be, but I have an empty space
If on the monitor menu, press the brightness is, is 48, don't know how to move, arrows react to the desktop, not the menu of the monitor
To buy it..but so far, even superfluous things no. I thought maybe somehow you can return the old brightness
Magnum 500
I understand that you have a software glitch in Windows? Then all you can fix little blood. Or roll back system restore points or Windows Installation on the net. Or long, tedious search for glitch in the system that may not always successfully resolved.
What version of the OS?
I had never had any of the sliders in Windows Power starting with Windows XP ending 10th.
Give at least a screenshot to see where it is.
Magnum 500 wrote:
If on the monitor menu, press the brightness is, is 48, don't know how to move, arrows react to the desktop, not the menu of the monitor
Actually the first time I heard about this!!
Read the manual from your monitor, and what is there to configure.
How have you connected the graphics Card (1050 ti) to the monitor?
Via Converter VGA\HDMI. This is such perechodnik. Bought specifically for the squares
Windows 7х64 Maksymalna.
On the side of the monitor there are buttons, slightly adjusted, like a better
The slider in the top seven and should be in the bottom window in the screenshot
Spoiler
Magnum 500
Spoiler
This panel is available on laptops and netbooks. Now came to my Seven, there's nothing like it anywhere!
Read it here http://www.infowall.ru/index.php?art_id=701&menu_id=33
Well, let's say. Brightness is still lacking, the eyes get tired, although a week ago this was not
Magnum 500
If the old monitor with led backlight lamp, ustavni eyes should not be. And later monitors with ice illumination is the flicker of the LEDs.
In any case, each monitor requires a normal settings of brightness and contrast, the norm in my 120 candelas per square meter. Color to adjust without calibrator harder.
Just need to set (preferably from the menu on the monitor, not the OS). If necessary I can give the program for calibration.
And the problem might be with the Converter image VGA\HDMI. Cheap often buggy and broken.
600 se Converter is worth, I do not know whether it is cheap
I understand the village of the lamp, because in a menu on the monitor everything is fine tuned. Monique 2007
Magnum 500
600 RUB. a good Converter can not cost (the price in China is not more than 150 RUB them).
If it is a lamp fault, the repair is very gemorno. We changed the lamp with a friend. In the end, under the multiple layers of the scattering films I got a speck of dust (dirt). Now in the center of the screen unpleasant Plama. Repairs must be carried out in a sterile (medical) conditions, its a good service for a tidy sum.
In this case, shrunken lamp, which I doubt, since bulbs usually burn out and the monitor fails the test light (although budget models may not be the test).
It is desirable to connect the monitor to another source (PC) without a Converter and verify its performance (in the extreme case with the old video card with VGA).
I think that the repair will quote a price higher than buying a similar used.from. monitor. To repair not suggest.
Here's an article with similar to your case of a malfunction and its solution. https://geektimes.ru/post/258306/
You advise to save up some money and take Monique with digital inputs (dvi-d, hdmi, d-port, etc.), because those converters are most likely hell input lag (delay of image output due to their cheap components, chip DACs).
That's the price of lamps in Russia http://www.remcomplekt.ru/cat_names.php?idn=196 + shipping + work (or not, if he is).
Thank you
I myself do not climb to repair, if not adjusted, would have to find another square
If you take the full HD option I'm afraid to play normally, I can't, graphics card is normal, but the PERC FX-6100 full HD all modern games will probably be logogram.
Magnum 500
Percent to no effect. Resolution is the destiny card. Percent calculates the geometry and motion of objects PS. Tests of the processors carry out at the minimum resolution with min. graphics settings. Everything else is on the card.
And with overclocked 8-core EF x (8300-9590) also happens logogram. It is necessary to properly disperse (memory controller, memory, etc.) to minimize lag.
In my opinion there is a good video from Stalkee (man in a medical mask) about the overclocking of FX-s.
Your vidyuhi written to work on FullHD with medium graphics settings in most games, you'll be fine.
Well, in the Witcher 3 is even on my 1280x1024 brakes some where visible in the middle,in the same Novigrad, in other games is fine, but it is clear that there is no stock at all. Even at high many games are uncomfortable with subsidence.Far Cry 4 for example. So I think that will be one shirokoformatnye well..
Magnum 500
We must look for the bottleneck in the system. CPU frequency is very small. The frequency of RAM don't know, but its capacity also will increase, especially with overclocking the CPU NB (memory controller). With your system you can squeeze more juice, trust me.
Pomonitor AIDA 64 and Afterburner the cause of the subsidence.
At such a low resolution you have and the GPU will be nedozagruzheny and video memory in this mode, half free.
Winchester check on slow SECURA Victoria, cheap Hitachi this sin.
Magnum 500
RGB range checked? I have often happens that he himself flew from limited to full (bad, not enough on what monitor the picture will be beautiful and pleasant).
Spoiler
Alex Hawk
I'm only at a full sitting. Black it normal, and not a gray in place of black. And the image looks more contrast. That's just with movie more the case. The whole point of movies set for 0-255 (Range tweak for the video in the panel Invidia and norms ).
Ryazancev
Of course black blacker and white whiter. But most computer stupid content is not adapted to the full. So... And the game was then very dark, then too light. I can't say that it was better. Contrast, Yes, but not better. On my monitor black and already black. There is no feeling that gray. S27C650.
Magnum 500
Little poke there, here it and make sure there is no difference. After that the monitor is connected?
Alex Hawk
Dear, the whole computer content: Websites, programs, pictures, games, etc. (Except Movies) is being developed under a 0-255 (even YouTube).
I have the monitor switch is complete and the compressed color range. If you put compressed 16-235 then black, white are normal, just the number of shades reduced.
Just need to calibrate the monitor. If you need assistance in calibration, write to the PM.