3 New Notifications

New Badge Earned
Get 1K upvotes on your post
Life choices of my cat
Earned 210

Drag Images here or Browse from your computer.

Trending Posts
Sorted by Newest First
w
w01f_ram 25.09.19 01:11 pm

Not working hdmi

Good time of day. I wanted to connect the TV (LG 42LA644V) to PC (mother Gigabyte GA-H110M-H video card Asus GeForce GTX 750Ti-OC-2gd5) cable HDMI-HDMI (for the first 3 years of life card made it to this connector) and was faced with a big problem. It does not connect. The TV (the HDMI ports are OK, connect a different device) does not even see that the port to which you connect involved, that is, its icon is grey, but on the computer in the settings of the graphics card shown is connected to 2 display (1 is my monitor by VGA, 2 TV via HDMI). What to do - XS, and have the driver reinstalled, and set different frequencies for 2 displays. Trying to something to connect to, it came to integrated graphics, which, fortunately, did not disappoint and brought the image on the TV (though sound not tested).
Please tell me what could be the reason? Could this be connected both with that, and on the motherboard and on the graphics card, there are no connectors s/pdif (I heard that some televisions do not want to be friends)?
7 Comments
Sort by:
S
SPR1GGAN 25.09.19

w01f_ram
in a computer cord in the mother or in itself vidyahu insert?
if only 1 TV without Monica story is the same?
in my opinion a software problem ,just something to percocet necessary ,if the ILC sees the cord ,then the signal from the TV is ,and TV is not .
most on parctice just connect the TV to your PC problems have been caused ,2 monitors at once did not pull up .

W
WraithGuard 25.09.19

Alternatively, the cable plug connector in the surrounding housing where it rested and was not included until the end of the card.

w
w01f_ram 25.09.19

SPR1GGAN
Cable tried and the mother and the video card. With the output on the motherboard is working, exit on the video card there.
To connect also tried, the result is the same.
Specifically what you can dig? That poke in the software? Just so many things shoved in there that hardly netkanye space is left

b
bazilews 25.09.19

w01f_ram
And the monitor has no hdmi output?

w
w01f_ram 25.09.19

bazilews
Unfortunately no

w
w01f_ram 25.09.19

WraithGuard
The nail on the head! Now looked this matter and indeed, the cable rested on the frame... I was just in shock, as I hadn't noticed before.... Thanks for the tip

w
w01f_ram 25.09.19

The problem is solved. The cable is not fully fit due to the fact that rested against the frame of the system unit. Thank you very much for responsiveness.