MicroProse because of the Hard Drive.
Put the old hard as a temporary storage for big games, he gave a couple screens of death, after formatting behaves normally. But all open world games ( e.g. the Witcher ) every 5 to 10 sec is characteristic of Microlog on SSD/hard another such is not present, all smoothly and with a steady schedule of the time frame. That may wash with the disc wrong? Not really talking about SMART objectives. Status shows good, Vcr drove to broken, none.PC :
Asus strix RTX 2060.
Intel core i5 9400f.
16gb ddr4 RAM hyperx dual.
240gb SSD, WDgreen.
HDD sg 1tb
Motherboard Gigabyte B360M D2V
The PSU is a be quiet SYSTEM POWER 9
Hmm, random read of small blocks and butterfly was too low the scores are. If the head block has not kept pace with positioning. The sound something makes?
le_prophet
Then the maximum that you can do at home is to change the SATA cable or the contacts on the inner side of the electronic Board of oxides to be cleaned or something. Just for this it is necessary Torx screwdriver, T5 or T6, I think. Maybe it will help. But most likely - no.
Sanchez Ramirez
Yes, I by and large do not care about this hard, wondering what could at one moment will happen.
Well, as I said, u disk, as far as I can judge from the presented data, with a linear reading is no problem, because the unit heads to reposition constantly not needed, but the random read and the butterfly is the problem. To blame mechanics or electronics - hell knows. Similarly, the question can be answered only specialists in data recovery.