kolafox 20.03.20 09:05 pm

Hangs computer with error: 0x00000124 (Kingdom Come: Deliverance)

During gameplay in Kingdom Come Deliverance hangs the computer the log shows the error:the Computer has rebooted from a bugcheck. Error code: 0x00000124 (0x0000000000000000, 0xfffffa8007ce3028, 0x00000000b6002000, 0x000000000a000135).The game seems to go more or less different frieze 2-5 seconds too,but then it is unprecedentedly sharply
hangs computer with this

flickering screen and a strange twang of a broken sound.Computer in the future is subject only to reboot..what to do?

9 Comments

Sergey Matokhin 20.03.20

Get Google the error code and read it.

a1037 20.03.20

kolafox, for a start, crackdown if you have to remove to drain.

kolafox 20.03.20

a1037
Wn will try if there is another option write...

JuvialS 20.03.20

The second option does not grasp the power supply on the CPU or damaged motherboard (if there is no PC to boot normally) and the first acceleration, for him and usually this error occurs because the overclocking consumes more power. The driver is the last thing to think about. BP, if only in a General power failure.

NoneOne2010 20.03.20

Can help:
BSOD Codes:
0x101 = increase Vcore should be.
0x124 = increase or decrease QPI/VTT, if it does not help to increase the Vcore.
0x0A = the instability of the RAM/IMC, increase QPI/VTT,if not worked to increase the vcore.
0x1A = Possible faulty memory module, test the memory using MemTest. It is also possible the lack of Vddr.
0x1E = Increase Vcore.
0x3B = Increase Vcore.
0x3D = Increase Vcore.
0xD1 = increase or decrease QPI/VTT, if it does not help to increase the Vddr.
0x9C = increase or decrease QPI/VTT, if it does not help to increase the Vcore.
0x50 = wrong timings or multiplier memory may not stable uncore - increase/decrease Vddr and/or QPI/VTT, to test the uncore multiplier (frequency of an anchor should be twice the memory frequency to Blomfield and is 1.66 times for Gulftown).
0x109 = increase/decrease Vddr.
0x116 = low IOH (NB) voltage or problems with videosystems, especially important for systems with multiple graphics cards.

True for 1366, 1156 and 1155.. Your code 0х124 - problem with suprugoj to the memory controller or PERC..

kolafox 20.03.20

After the 2 hour test like running.Well now if the problem as it turned out because of the crackdown say.How to choose then the acceleration.In the current situation was overclocked processor and put the timings on the memory..Which of the above love to try to increase or decrease?

wiedzmin6891 20.03.20

I have this error died 2500К at the time. Long standing acceleration (about 5 years) at the same voltage, the motherboard has exhibited itself. Categorically this is not worth it. So I advise you to read the information on overclocking, correct, it is your CPU.

kolafox 20.03.20

wiedzmin6891
Well, in other games there were no problems many years,not overheating no freezes...were hovering,well, rarely does not prevent to play this one..Err while the memory timings and its stock frequency is not looking at overclocking,you should check...

kolafox 20.03.20

In short, was not to correct the frequency of the acceleration to verify,this screen popped up right in Windows.On my old overclocking then added voltage to the CPU slightly,thereby refining your overclocking and all,during a few hour test lockups were not observed...It is,well time will tell..

In General, after several time tests hangs were observed.Thank you all for your help the problem seems solved..Thanks to all who responded and helped!..