Gtx1070ti
Welcome guys. I bought Gtx1070ti, but the motherboard does not see it, mother, older Socket LGA 1155 (( motherboard-asrock z77 extreme4 m. How to be guys, urgently need an answer. BIOS flashed to latest version. All have already tried, is it really necessary to have to completely change the platform?RaptoR BTR
Ie does not see? As the computer beeps when you start? Beeping at all? Delusions at the expense of the platform, the problem is in the VCR, or the port of mother. Mother and Vidic are more than compatible, and there, and there are PCI - e 3.0 x16. What about food? exactly on all 8 pin connected?
TheHouse
Of course everything is connected as it should, it works the logo is lit, lapasta spinning. Connect via HDMI, black screen and all. Turn on installation, look in device Manager it is not.
RaptoR BTR
Ie Logo when you burn with discrete via HDMI to Monica, or when Antalovsky of incorporation?
Do you have DVI or D-port cables?
Ryazancev
No unfortunately, the monitor only supports DVI and HDMI. No difference, the logo is always on.
RaptoR BTR
We need to protest vidyushku on another PC via HDMI and DVI. Then, too, to do it on his own. Now peredny it in another slot psi-e may he Mamma buggy.
Well I will try myself waiting for tomorrow so I could have a friend to check. ATP you guys, even if encouraged)
Firmware Mat.Board 2012 doesn't know math. charge it. Look in the service centers to flash without a video card . Something doesn't add up , reinstalled windows .. Before the 1st of April is still far away, the Joker.
Gera95
Who told you that it doesn't work? My motherboard does not see. And you mean, if the motherboard does not see, how it works, burning logo etc I also Hz) is itself in gland do not rummage, therefore and asked for help. But I'm not making this up, why would I? I described everything as is.
Reached) Nourishes the block, and therefore burns, but the mother does not see. XS in General, I got confused, need a specialist.
RaptoR BTR
Maybe the slot is burnt ?
Not that old mate , I have 1150 socket and works fine.
An__ei
What are you talking about? Mat. the Board does not know her where you ponabirat?
RaptoR BTR
Yes, seeing your mother is 100% video, that's not the problem. Check on another computer, or the marriage of the VCR, or the port is buggy, burning logos on the Tivo? it nifiga not an indicator. Another problem may be in the memory of the VCR....or even in the RAM of the PC, but this is a must watch...
Gera95
What's the logo? on the VCR, which is backlit? BIOS here not and, it will burn just from food.
But if you do not pass the bios test, will be a long squeak about saying that the VCR is missing or not working.
RaptoR BTR
I have the same chipset and when was 1070 at the first startup screen also showed nothing, I'm scared that everything came ))) so then I start, so I had to reset the BIOS with insertions. In General, load in the installation go into the BIOS and reset the settings (although they will have to do the overclocking, the timings for the memory to pick up)or pull the battery for a few minutes. After migrating from 1070 to 1080, this was not.
Gera95
Lights on the graphics card and the cooler will work even if vidyuhi not showing a signal on the monitor but working as part of the supply to the coolers
Here's a video at the end look there vidyuhi nothing displays but the coolers and lighting raboteau (by the way vidyuhi from Gigi)
Spoiler
so better shut up if you zero in hardware.
In General, today just saw, most likely a marriage or maybe as it should be?
Spoiler
And the power supply is pulling. It happens that if not enough power, it will burn the valves will be twisted and the signal to issue no.
Guys welcome! In General, the problem was quite trivial and simple. Just needed that to install the driver from the graphics card is undecided, as the XS but it helped. Stuck the video card in the motherboard, then switched to installation, installed the driver from the card appeared in device Manager, switched to the clip via HDMI and it worked)
RaptoR BTR wrote:
Guys welcome! In General, the problem was quite trivial and simple. Just needed that to install the driver from the graphics card is undecided, as the XS but it helped. Stuck the video card in the motherboard, then switched to installation, installed the driver from the card appeared in device Manager, switched to the clip via HDMI and it worked)
Ahah.. I the golosina. )))
I knew that the outcome of all such foolishness.
My question is, what's the point of creating such a fictional fact? What they created dozens every day?