is this normal ?
from where such generosity after the boost to 4.5 GHz ?bloomm
cpuz does not show anything other than the 4.5! stone фх4300, drove a bit and checked in ETS 2 stability turbo disabled everything in the BIOS is on auto, the RAM to 1600 since the beginning of hm showed max 5GHz but then it started)
ETOGES frequency is not in real time)
romen94 wrote:
cpuz does not show anything other than the 4.5!
These two lines are monitoring the processor state, not La, La.
Spoiler
romen94
You have a multiplier of 22.5, and should be 20. Maybe in the BIOS autorespon included?
kung fu master
I don't know turbo disabled everything else on auto the RAM at 800 if all is on auto then the BIOS can put whatever you want xd
romen94
Model of the motherboard throw. Can you tell me what settings to check.
romen94 wrote:
m5a78l-m lx BIOS latest. multiplier set 22.5 and the rest is not touched )
If I'm not mistaken, safe overclocking 4800 MHz. With the maximum permissible 70°C
Is it so paryatsya at least need a complex disperse system, not one percent.
romen94
Menu JumperFree Configuration CPU OverClocking and put the Processor Frequency Multiplier to Auto. The idea is that it should return to factory default CPU frequency, if you want of course. Now you have a working CPU in overclocking, if no errors and/or overheating, you can leave it as is.
WanRoi
a little more than 60 will go after a long load? I have no overclocking was 9 13 degrees in idle!
romen94 wrote:
a little more than 60 will go after a long load?
The idea - YES! But given the weak cooling to the motherboard - then I have nothing to say, everything on your personal experiences.
WanRoi
the motherboard chipset is too old and not for overclocking but so far nothing is buggy)