Replacement fans for ITS (problem with connectors)
Good day,please tell me, is it possible to somehow get this ITS a
https://www.gigabyte.com/ua/Thermal-Solution/AORUS-LIQUID-COOLER-240#kf
c RGB coolers installed in the housing.
The problem is that according to the video: native to the cooler ITS connected as a 4pin to 3pin FAN and for RGB, and body - solid 6pin included in the controller.
In result I want to keep control of the revs/power in the NWO, and RGB backlighting to write in the controller.
To understand how to 6pin:
1. Ground
2. +12v
3. Tachometer
4. R
5. G
6. B
But soldering nothing, and in the hands of not sure. And even if you figure out where is what, it is still unclear why ITS on the FAN is 4pin.
Therefore, whether to look in the direction of some adapter or even not an option?
And that from under Windows by softinos from Aurus nizya everything set up by connecting a standard (As provided by the manufacturer, according to the instructions)?
Pump you will always be 100.
And the speed and backlight only software.
And it is designed.
http://download.gigabyte.eu/FileList/Manual/cooler_manual_aorus-liquid-cooler_191220.pdf
I understand this all only works on Mothers Gnilopyat (Software settings)?
Try RGB controller stick (from pump out), and fans (4pin) to the nurse. But the idea that so that is how it should work normally/
What's in mommy's RGB connectors do not climb on the direct illumination of the turntables, the other connector?
In short a bunch of options, COLD.
I would in your place is not bought. As far as I know support software this disco sucks. This trouble is all cock all technology vendors. Sooner or later do to configure is not able because of the glitches and incompatibilities with other OS versions. I had a poke around on the ASUS. Buggy all terrible. So also to remove this Shit problem.
Another minus - the fucking software from all devices is constantly hanging in the system. In the end, decreases the stability and performance of PC.