GTX 1070 8gb — hovering.
⠀⠀⠀Well, I think first we must introduce our patient:1. *percent. accelerates to automatic to 4GHz.
.png)
2.
-1.png)
3. as a Mat. tab — B450M-A PRO.
⠀⠀⠀And now to the problem itself. While working demanding games, which often have anti-aliasing and other graphics chips, after some time (20-40 minutes, everywhere and always) happen hovering image. The picture displayed on the screen, freezes on a single frame and do not even think to move one iota — however, a few seconds later two or three heard that the game responds to actions performed by keyboard and mouse; another minute or two/committing a couple of action and voila — the departure. Artifacts, and other obvious problems like during this process, and after were not observed.
⠀⠀⠀The first thing I went to load the graphics card in the tests (30-40 minutes). To the surprise, no artifacts, no freezes, no even any sign of an unstable card was not detected; synthetics is, but field tests — no. Not being chased, temperature at 85%-Oh, the screws holding at 82-83 degrees.
⠀⠀⠀Here's an example of the error:
Spoileron failed applications: SubnauticaZero.exe version: 2019.2.17.429, time stamp: 0x5e310587
The name of the failing module: UnityPlayer.dll version: 2019.2.17.429, time stamp: 0x5e310698
Exception code: 0xc0000005
Offset error: 0x0000000000463950
The failed process ID: 0x1090
Start time faulting application: 0x01d617dd023fb2d9
Path faulting application: D:\setup\Subnautica Below Zero v27104\SubnauticaZero.exe
Path faulting module: D:\setup\Subnautica Below Zero v27104\UnityPlayer.dll
Report ID: 2630e254-4cf1-4c85-9137-7d1273d4555c
The full name of the failing package:
The application code associated with the failed package:
> What can be the reason for such behavior of the graphics card and can it be solved?
kenkan
the temperature at 85%-Oh, the screws holding at 82-83 degrees
You card is overheating much higher temperatures at almost full speed.
Similar to overheating. I have a similar problem it was still on the Radeon HD 4850, the game just hung (t=90+) until I replaced the native klad to Zalman, the temperature came back to normal and had no problems.
the temperature is really high, my benchmark is max of 76 degrees in games above 70 did not notice.
Guys, he can Ref. For reference quite fit. In General it is necessary to write an accurate model, the presence of acceleration and the last time I performed maintenance.
Maybe there inside the boots, freezing to death leaked thermal grease and thermal pads.
Ryazancev
acceleration was not, the gv-n1070wf2oc-8gd.
well, you are right as the water looked — strip was still alive; but the pasta is dry and dust is sufficient. if it on the cooler or somewhere else in a visible place, looked to be early.
once to the commonplace thought of this.
Spoiler