Edvins 27.04.20 05:36 pm

How to connect power to two GTX 1070 (SLI)

The crux of the matter: there are 2 cards Palit GTX 1070, each with power 2 X 8 pin. Power supply AeroCool Strike-X 1100W. One card is connected without problems, and the second sobriology is not enough, although according to the description the unit has everything you need. For the first time faced with this. Pros - help!

12 Comments

CreMat0ry 27.04.20

Edvins
Well plug and the first

Edvins 27.04.20

CreMat0ry
Do not go out. It seems that some cable is missing.

CreMat0ry 27.04.20

A photo would not hurt the blind as it is very hard to guess what it is and what is missing.

_DoctorWho_ 27.04.20

You have the rear panel of the PSU is this?

CreMat0ry 27.04.20

There is such a thing if that's what I was thinking

_DoctorWho_ 27.04.20

You should have 2 cables for pci-e connectors,one for a video card and another for the second

CreMat0ry 27.04.20

_DoctorWho_
Supply some 2 X 8 and cable there like 1 x 8 in set. Just do not tell

Ryazancev 27.04.20

CreMat0ry
Connectors to power the graphics card (PCI-E)
6x 6+2 pin
https://www.dns-shop.ru/product/879fa857e1af3361/blok-pitania-aerocool-strike-x-1100-strike-x-1100/characteristics/
Look in the box. They krasnenka!

CreMat0ry 27.04.20

In short here's what you need

VOVAN WOLFovich 27.04.20

Edvins
This PSU has it ALL and in abundance. Cables should be enough. Look in the box.

--
If lost, it is Your problem, you will have to buy. Use the second option, and look for the adapter in the store or to the video: Molex - PCI.

CreMat0ry 27.04.20

VOVAN WOLF
Plyusanul :)

Edvins 27.04.20

CreMat0ry
Thank you very much. The entire house was ransacked and found this cable.