Boomgaarden
With what I've painted here can notably neighing, but still.It's going to be good for cooling?
kkirya
There is an option. I.e. the vertical flow on the CPU and the rear fan on the hood. At me such case was. There's even a trumpet was for him.
We generally have the physics of air movement: cold is heavier than hot, so throw out hot air from the top.
I don't understand what's going on here
if cool naked CPU, then it's probably possible. you need to position the spray at 45 degrees and you need a very powerful jet to blow straight and the density of the air shock was close to standing water voschem.
There is only 2 fans (CPU doesn't count) and they need to properly and effectively put in order to preserve precious degrees CPU)
if the cooler on the CPU parallel to the plane of the Mat Board can be put on the wall but not very powerful
if the cooler is perpendicular to the outlet on the wall that either it is not particularly necessary if you have air intake from somewhere else. will be quite passive. productive if you put the cooler on the wall is possible and the oats to stick, the air flow from the tower.
on the rear power cooler is if the air can enter through the front wall.
if the processor is not powerful 65-95вт and has an upper solid unit with a 12 cm fan can be finally any additional fans not to put in a spacious well ventilated case
Normal scheme. On the front panel to supply 120 mm. most Importantly, make sure the wires do not interfere with the flow.