NeverWinter and brakes (Neverwinter Nights)
So.There is: Athlon 2000+, ATI Radeon 9500 Pro 128 Mb, 512 Mb operatives, the sound of a Turtle Beach Santa Cruz, screws from Maxtor, ABIT mother on VIA KT266A.
Also there are two versions of NWN (the one with the SoU, the other with HoU). In both cases, nalichistvuyut brakes. And tried a lot of things to do: the sound was turned off, were transferred to MilesSound 2D (or as it there), changed the wood vidyuhi (from Catalys 2.4-3.10), put a bunch of gadgets for mother, nothing helped.
Confused by one fact. When I run nwconfig and it makes testing of the system, it defaults to 800*600, whereas his companion with the same configuration (Radeon 9600 Pro 128Mb and memory 256) default rises 1024*768. This leads to the consideration that my vidyuhi this config does not see, or something like that...
Another tried NWN on 3 stump with a GeForce 2 chase Flies... bastard...
Who that can advise?
About expansion is probably not vidyuhi, and monitor. But in terms of brakes, I don't know the same cookie. Simply put the quality of graphics with the best to good. More can't advise anything.
one piece of advice try to put catalist 3.7 we can help
I have almost 8500 full chart in a resolution of 1280 x 1024
goes without moleyshy the brake but with the 3.8 had problems with the graphics
Try to play around with the settings to OpenGL in property vidyuhi.. Och. much depends on the speed of the game from kakchestvo settings..
Can you direct Heh ancient version? I have somehow not on XP played fine until 9.0 b is not set.
1) as always check the wood of the Radeon.. this is not the first case. NVN could not initialize OpenGL (Yes... it was him, not Direct3D). To do this, put the last fire wood... or those that much like your vidyuhi.
To Novel.
The configuration of the computer I have is about the same. Only the Radeon 8500. With a set of drivers catalist 3.5-3.7 there were no problems, only had jackdaws long time to arrange, so that my old game went fine. With catalist 3.8 any major problems. Almost all of the old DX games (2001 and earlier model years) stood on the ears and do not work. NWN 3.8 I have not checked, as did the roll back to 3.7 and it feels great.
it was noticed that nwn is often slow on amd regardless of the type of video card, with those stumps fly, even on much weaker machines...
A solution to the problem with the brakes on AMD-shnyh percent not found?
Still a shame that the toy, which, in theory, at the third stump comes with 256 m of memory on a Athlon XP 3200+ with 512 barely crawling(
Valaska I have no frills, really, just a geforce 4 MX 440, but in fact smarter than rekomendovano configuration like?
I have, by the way, the checkbox on the shining water is not put, MB here the dog rummaged and what it is to initialize OpenGL can't?
well darling it is not necessary for AMD to drive
I have a 1.7 XP and everything is lovely but the video I have a 9800
and this is a reason to not retarded
the Council changed the video even so the mx440 is not the best video
I'd not a cent of money threw and the video
what a powerful video TEP's easier for percent she will eat !
My friend is also AMD 1.7, 256 MB RAM, radeon 9600 Pro 128 MB with native wood, and saw with my own eyes NWN c almost the best settings to fly.=)
well... episkopiana begins...
I have a AMD Duron 950, 256димм, Gators Ты4200/64mb. The brake on the higher settings supervised only lokah with more than 64 large objects (tiles, large leyblov and Creech). Well, in the zones more than 12x12.
So don Nuno on Amdshnye percent to drive.
Ndya, it's called, the game did when stumps were third, and the second GeForce...
I, sobsno, it was assumed that once the video card is faster than recommended -- then it matters not, because someone out there wrote earlier that on the third stump with the second gehorsam flies, they say...
Yes, I have one point asked, you did not pay attention, apparently: jackdaw about brilliant water set? That it from some need?
explain words Fenrix-a need video Radeon 9500 or above or GeForce 5600 and above
5200 intentionally lowered by the fact that it is a perversion and not the card :)
and run it on the water with pixel shaders 2.0 is useless !
I have MB Abit NF7 Nforce 2 Ultra400/Athlon 2500XP+ (Barton) /2x256mb DDR333 Ram/GeForce 5900XT 128Mb 300/700. Brakes at any resolution and any settings. What's the problem?
To answer the question information is clearly not enough, but still try.
For starters, try the driver settings turn off vertical sync. Then, set the drivers, the speed optimization for Direct3D mode. Disable anisotropic filtering or set it to mode - determined by application.
The chosen configuration must fly on all resolutions. So look for reasons.
Possible option to change the set of drivers for the motherboard/ video card. The latest drivers are not always the best.
Do not use standard operating system drivers!
Yes no I do not think that it and the bridge is overloaded
anyway pretty fast nforce chipset default !
I would also advise that in the BIOS to set the timings and just
to configure the optimum system performance !
>no I do not think that it and the bridge is overloaded
>anyway nforce chipset is quite fast by default !
>I would also advise that in the BIOS to set the timings and just
>configure for optimal performance !
Baja! Fast...by default. I'm gonna die.
Do not worry. If you have frequency percent >=1 GHz(no matter AMD or Intel) and you've got it working on the nurse that now works hard inside simloka, do not look for problems where it is not. Driver and graphics card. If class card GeForce4+(Radeon 9600+) then the problem is in drivers. If GeForce 2-(similar to ATI don't know) problems can be in the most its and drivers. again, it is not necessary to require the second divorce of megaproviders. Ogranichtes a resolution of 1024*768, drop shadows.
Another possible problem is the sound.
Try to remove Hardware acceleration (if present and enabled). Get 4, 5.1 speakers, put two. Remove the sound at all. If did not help - see above.
I have MB Abit NF7 Nforce 2 Ultra400/Athlon 2500XP+ (Barton) /2x256mb DDR333 Ram/GeForce 5900XT 128Mb 300/700. Brakes at any resolution and any settings. What's the problem?
Support Mr. former Annona.
2.5+, GeForce 5900.. well not in this case.
The case for firewood and/or glitches of zvukovojj.