The endless beeping of the beeper
SOLVED https://forums.playground.ru/hardware/beskonechnyj_pisk_bipera-991290/#comment-18768164Did not exist before the speaker decided to throw when you turn the PC speaker beeps as in the video (link in the end), while through the beeping audible signal successful completion of POST, that is like the continuous sound of the speaker to the BIOS has nothing to do. Windows loaded, everything is fine as before the installation of the speaker itself ))
Tossed another speaker - same thing.
On another computer the same speaker - works as it should
The work of the speaker on video
Please note that a single signal is a successful POST, the PC is loaded on, and this background sound hammer all the time, it begins when power click, and then a single POST
megabate
Not experienced with this, MB with RAM problems? Or the mother herself. But if everything loaded, throw the speaker. By the way what kind of mother is that?
InboxM
I took out the RAM, and everything was turned off. The answer is the same, give the power button and immediately start the sound, and through it and the standard single beep (if connected or more beeps if RAM is removed for example), i.e. to signals POST generally continuous signal the campaign is irrelevant...
The motherboard I have Gigabyte - GA-H61M-S1 (Rev. 2.1)
megabate
Friend, don't bother, and throw a beeper, is clearly a kind of incompatibility.
InboxM
Yes, no, I will not throw, I'm on the other comp put it, it works )
And without problems I can not, alas, a lot of thoughts plucked from the fact that on one plowing of the rules on this, I think, and not too high voltage if he has any going? ) Don't understand it particularly
But to measure the contacts under the beeper, the multimeter on the motherboard probably will not, but that is not a good point to them)) the PC is working normally and stably, the beeper stuck and doubt which is gone now, but five years is kind of ugh ugh this comp
InboxM wrote:
incompatibility.
And the plan is not compatible? Specifically with this squeaky toy or even? I have three pieces tossed if that ) All behave well.
megabate
Don't know what the problem is. Wait maybe someone else will answer. Or on another forum ask.
InboxM
In short, the problem was solved)
Still in the BIOS beeper precisely such a signal was given.
The BIOS settings I have marked"to warn of malfunction of the 1st system fan at the same time his record was 0 rpm, because I have stupidly not connected because I have two fans via molex
Turned off this warning in the BIOS and continuous signal as the video was gone, now a single successful POST.