Board i7 8700

and with the choice of motherboard can not decide. Z390 or ASRock pro4 or ASRock Z390 Phantom Gaming 4, maybe X Z390 Gaming Gigabyte or ASUS Prime Z390-P

Why do you need the z chipset, or are you then going to upgrade to k version?

hyper1
If not k, it is enough for the box or deepcool gammax 300-400

hyper1
With motherboard, get the ASUS.
And memory is what?

darkpromo
It is clear that the Opera was not working for the poor 2666

darkpromo
then, the memory 3200 from me.

Aloska
not enough,this percent Bastida to 4.3, this is hot

hyper1 has written:
Tell me what cooler to take under 8700 not
I have the same Prots. Cooler stood before the box, but is a slag, and complete. The impression is that Intel put in the box the cooler is not from the Prots, there is even the base of the cooler crystal percents do not overlap over the entire area. In the end, if you have enabled Turbo Boost was followed by heating up to 100 degrees. If Turbo Boost in the BIOS to disable, then the temperature at 70 degrees under load kept. Bought a cooler ID-Cooling IS-60. It is a plus that he's not giant size, therefore the width of the housing is not critical. Well, the fan slow speed, i.e., a significant there is no noise even under load. Now when you turn on Turbo Boost the temperature reaches 70-80 degrees under load without Turbo Boost about 50 degrees. At idle just above 30. The indicators are certainly not the best, but for fans of such small size, is quite normal. Monster cooler-tower still 5-10 graudal improved the situation, but stood up to it in my case Hz. I'm very happy.

hyper1 has written:
and with the choice of motherboard can not decide
Can only recommend the motherboard that I have. Others have not experienced. I have a fairly simple and not particularly expensive ASUS PRIME Z370-P. Working fine for more than six months.

hyper1
Well, Google gives 80 degrees.
Technically enough.
Want a little better take gammax 300-400

hyper1
Have Hammaka 400 decent throughput sposobnosti:
https://www.regard.ru/catalog/tovar255829.htm
74.34 CFM.The only noise 30 dB
Can GamMax 300 and a pair of such valves:
https://www.regard.ru/catalog/tovar223109.htm
To adjust with the help of the mother momentum, wow, the beast will be. Productivity 86.9 CFM and noise 17 dB

hyper1
Neptwin V2 DEEPCOOL ASSASSIN II.
Only it is necessary to look, it'll fit in the case.

[Denis]
a couple? on the radiator from hamax 300 to put on a 2 valve?

hyper1
Well, Yes.So the air flow is faster going.The only negative is, like a vacuum cleaner.Usually,the valves 55-60CFM
1 m3/min = 35,3147 cubic ft/m (CFM)
If the case is ventilated badly, it is a similar manipulation without the use of

[Denis]
1 m3/min = 35,3147 cubic ft/m (CFM)
I do not understand, but very interesting)
no desire of kolhozah. I like this one, like the rules for the characteristics.
Спойлерhttps://www.e-katalog.ru/THERMALRIGHT-MACHO-X2-LIMITED-EDITION.htm

hyper1
Cool and quiet?
90CFM is the amount of air flow
https://ru.m.wikipedia.org/wiki/%D0%9A%D1%83%D0%B1%D0%B8%D1%87%D0%B5%D1%81%D0%BA%D0%B8%D0%B9_%D1%84%D1%83%D1%82_%D0%B2_%D0%BC%D0%B8%D0%BD%D1%83%D1%82%D1%83
He's got height and a good

hyper1
Macho is good, but TRUE-SPIRIT-140-POWER will be better specifically for the 8700 without K
Macho is too wide, you lose efficiency at low speeds fans, The True spirit's performance at low rpm better.
https://www.e-katalog.ru/THERMALRIGHT-TRUE-SPIRIT-140-POWER.htm
Only Height:171 mm Need a wide body. Zalman K1 will go.
https://www.e-katalog.ru/ZALMAN-K1.htm
If the percent of C To, we've got to watch something better, like Deepcool Assassin II, its SilverArrow IB-E Extreme, Noctua NH-D15
Only these superbusy not compatible with high RAM.

[Denis]
but there is one but this cooler may not fit in my case. everywhere different the old max height of the cooler

Ryazancev
not my case. body to change is not an option. you need to choose under my

hyper1
In Regarde 162mm:
https://www.regard.ru/catalog/tovar252909.htm
I usually take it all
The cooler, of course, the beast).And on the RAM will not go

hyper1
About macho read the reviews. Some users have had to raise the front fan, when the memory is high, so that when the big casing on the motherboard.
This may narrow your body and become height.
And when you take, take a ruler or a plastic card and carefully check the base. With him, too, can have bugs. This applies to all coolers, maybe except Noctua and Bequita.