The graphics card is not loaded (Grand Theft Auto 5)

If you change the settings the fps will remain the same as the load on the graphics card is even weaker

GreenGrizzly wrote:
...And Yes, CPU reveals the graphics card. In the same Witcher 3 ultra settings without any problem.
There is no such thing raskryvaet / disclose - it all depends on the game. If processor load is large, and it not remove (does not have time to bring the data to render a frame of graphics card) - it can stand. To know more accurately during a game to display data monitoring components (MSI Afterburner, etc.) - if the processor is loaded to the max (or close to it, in some games this is enough), the reason for it.
Спойлерhttps://forums.playground.ru/hardware/po_povodu_obnovleniya_zheleza-991319/#comment-18770575
Tried a game at...
Spoiler
...but then did not output the load on cores / threads CPU separately...
Something like this:
If a game uses multi-threading is bad (especially that sin old games) is sticking to a single core, loading it to the max can be clearly seen. And then everything will depend on the performance of the kernel - generally, the higher processor frequency, the more it is.
If you change the settings the fps will remain the same as the load on the graphics card is even weaker
A typical example where performance may depend on CPU. Usually if the CPU manages - at lower graphics settings (without changing resolution), frame rate increases (when not limited by vertical sync).

SonyK_2
So long and thoroughly chew it.
Always amazed at how much you pour out information for free.
GreenGrizzly
Your percent with memory open, the Witcher does not figure.
Here download watch dogs 2 set the geometry on ultra and additional processing at 100%. Well if there's 30 fps.
And Yes GTA in the advanced setting turn to 0.

GreenGrizzly
As written SonyK_2 and right.
You have a 3.2 frequency of this frequency in the same bucket have the rules of such gamers is long gone. Don't think it's just want 5 Hz on the core) Reveals a new map, strange to me at least with such frequency...

For a budget gaming computer with a CPU with minimum 4 cores/4 threads. Some games can load it to 100% and slow down, and perform any tasks in the background will lead to loss of FPS.

I had an old i3 on 2 cores at 3.6 Hz, with a 4 gig card 1050 tiay. And all flew on the ultra, was no special problems.

Someone suggests that you need more cores, I for myself found that the most important frequency, and the kernel already on the requests. What frequency is highest when the application always!

By the way, RAM max 1600 works, you have what frequency?)

For the overall development

Base frequency
Poligalakturonaz the frequency of all processor cores at maximum load. It depends on the performance in single-threaded and multithreaded applications, games. It is important to remember that the speed and frequency are not directly related. For example, a new processor at a lower frequency may be faster than the old more.
The frequency of the turbo mode
Polermaskiner the frequency of one processor core in turbo mode. The manufacturers gave the opportunity to the processor to independently increase the frequency of one or several cores under heavy load, so the speed increases. Greatly affect the speed in games and applications demanding on the CPU frequency.
The volume of L3 cache
Spoilerish third level works as a buffer between the computer's memory and level 2 cache of the processor. Used by all cores, the volume depends on the speed of information processing.
Process technology
Solartechnologie the production process, measured in nanometers. The smaller the process technology, the better technology, lower heat and power consumption.
Bus frequency
Spoilerset data exchange with the system.

GreenGrizzly
all changes made at the top are full of messages that I wanted to write