3 New Notifications

New Badge Earned
Get 1K upvotes on your post
Life choices of my cat
Earned 210

Drag Images here or Browse from your computer.

Trending Posts
Sorted by Newest First
s
skorpiok1 30.05.20 10:56 pm

bought called RAM

My mother: Asus P7P55 LX
my percents: DualCore Intel Core i5 650, 3433 MHz (26 x 132) Clarkdale
RAM: x2 Kingston 99U5471-002.A00LF DDR3-1333 2gb
Problem : Bought RAM 8Gb DDR-III 1600MHz Kingston HyperX Fury (HX316C10FB/8) when installing it into a computer is enable to boot Windows, after Windows restart.
Attempts: reset BIOS,Memok - did not help!
Are still options to reinstall Windows.But I decided to write you , I guess it is not suitable for frequency ((( say true or false? we need to change ?
51 Comments
Sort by:
X
X_ray_83 30.05.20

skorpiok1
Well, plank is probably on 8GB ? And to the uterus 4GB in slot ceiling.

u
user_77 30.05.20

I have the exact same motherboard,only percent 760.This motherboard with overclocking and auto tuning operas.memory.try a new strap to put in the first and third slots that is one. then turn on the computer, and a pencil or pen push the button autotune memory.button at the top near the straps

d
dimasukhinin1978 30.05.20

X_ray_83
To the uterus 4GB in the slot is not the ceiling you're wrong!

s
skorpiok1 30.05.20

I have 1 strap 8 GB

X
X_ray_83 30.05.20

skorpiok1
Samsung take they rod on any shit, Kingston demanding on compatibility and so on.

B
Belomorkanal 30.05.20

How much wild nonsense in the thread... especially about the number and volume of chips and about the insistence of the bars (not even in the chips, namely textolite straps) to compatibility. Don't even want to be here or what to write, hands, as they say, fall. Ignorance...

X
X_ray_83 30.05.20

Belomorkanal
the insistence of the bars (not even in the chips, namely textolite straps) to compatibility
It's not nonsense, not all straps are compatible with the motherboard, such unikalo in writing instruction what strap(firm) compatible with the motherboard.
Opus your take, especially about the processors ! Who would you say.....

B
Belomorkanal 30.05.20

X_ray_83
Start with the fact that in modern architectures, the CPU and chipset RAM controller is in the crystal of the CPU, not the chipset (not the motherboard). Roughly speaking, the motherboard is where the strap stick of RAM, everything else makes the CPU (controller RAM, if you delve into the details).
We conclude that the strips(firm) when buying RAM look only ignorant dummies. Knowing the same people look at the manufacturer and labeled chips. For example, the same Corsair (as 90% of the manufacturers of the bars (not chips, namely, straps)) does not produce their own chips, but buys them from Unixa or Samsung (I may be wrong, as they have lately is a mess and they often change suppliers). For example in my kosarevskiy RAM are pretty quality chips from Unixa, and the inscription Corsair for me - absolutely nothing like a man who really knows what gives the money. Besides, straps RAM exactly the same model, but different years of manufacture may also be on different chips, so the user write just the same for ordinary people (dummies) and not for unikalo
I will finish about the RAM. And then there is right now there a great and terrible Darth Maul will join in and even I have to blush a bit due to the fact that he knows about RAM at times more than I do.

PS And than You so take my opus? Very interesting to know.

X
X_ray_83 30.05.20

Belomorkanal
Yes, Yes, everything in theory is fine, but the author of the article Troll and so on.
I will finish about the RAM
No ! Sometimes the uterus is not the hawala module and th ? Never such was not ? I do not believe(especially in the motherboard Asrock and Biostar is a masterpiece with ddr2 and ddr3 ).

B
Belomorkanal 30.05.20

X_ray_83
We speak different languages. I understand Your, and You, unfortunately, do not understand mine. And to communicate in Your language I'm not going. On this finish.

s
skorpiok1 30.05.20

In the end I obywatela, who does not give Council and will flood?
Phoned ASUS on what the specialist said to set the Timing manually, I asked how,he replied on the phone such information is not allowed..go to those section fill in the form and ask the question and wait for instructions)

B
Belomorkanal 30.05.20

skorpiok1
It is impossible to determine exactly what is the problem of mere correspondences, you need to watch yourself. The specified frequency and timings to the specs of the slats - this is not the mode in which they must work, and the mode in which they passed all the tests at the factory where they mold the chips. That is, these modules can work at higher frequencies. Need to see the settings of the BIOS, to check at what frequency the RAM is run, try to manually set to 1333 MHz. So it is necessary to check the settings of timings, if anywhere is a car, then you can try to manually set the main timings. The entire thorough to explain long and tiresomely, to help Google. Well, or throw off money so I had incentive to help, because it can take a lot of time.

PS_ note: the BIOS does not configure the modules of RAM, it configures the controller to work with the standard RAM. Frequency and timings - not characteristic of strips of RAM, but only the controller configuration. This specifications slats - not the characteristics of the product, but only recommended mode of operation, respectively of the strap can work at a frequency of at least less than the specification, though more than it, but sacrificing stability. I advise to Google it and You'll understand.

D
DartMaul 30.05.20

Belomorkanal
This specifications slats - not the characteristics of the product
It's how you look)

B
Belomorkanal 30.05.20

DartMaul
I would say that the specifications of the straps is a reflection of the quality of the chips.

M
MunchkiN 616 30.05.20

more like a bug with memory controller
should leave just this one on the 8th gibbing and see if the BIOS its entirety. same thing if connected 2+2+8 and such a configuration finally the best not to put
if the BIOS still does not see all the memory you need to achieve reset of the BIOS. and start without the memory then increase it sequentially Lule.
if 2 GB and 8 work correctly anymore the problem is clearly in the new memory or in its support, according to peck.
in a manual anything is not worth the type of the timings of the divider and so forth

D
DartMaul 30.05.20

Belomorkanal
Not always

D
Dragon_Max 30.05.20

ASUS officially does not say that this mother supports 8 gigs straps. Here is a screenshot from the manual:



So officially, a maximum of 4 gig per slot (4x4, respectively, 16 turns). All that volume is higher at the your own risk is taken.

R
Ramzes181276 30.05.20

skorpiok1
There are several options. And every Advisor in its own right.
But You are not interested in theory, and what can be done at home now by yourself.
Set memory frequency to 1066 (your controller max. frequency of 1333 and can't afford more than 2 bars). Low frequency eliminates the timings (if the controller is not on the shoulder).
In the BIOS set Unganged (steaming mode) - it is more versatile.
So-as 8-gig modules are not officially supported - you can try to alter the BIOS (but not the fact that will help).
Here your BIOS. Please note (in memory and DRAM) -it fixes bugs with memory. The most recent BIOS from the top.
Спойлерhttp://www.asus.com/ru/Motherboards/P7P55_LX/HelpDesk_Download/
If this does not help - or the incompatibility of the modules, or disapproval of the motherboard 8-K.
Change your 8-ku on the 2x4, but it is possible that stable frequency will have to limit 1066.
P. S. the frequency of the memory 1600 in the BIOS generally will not be until percent will not change ( he knows ).

s
skorpiok1 30.05.20

Ramzes181276
In this entire conversation is the most competent advice thank you I will try

X
X_ray_83 30.05.20

skorpiok1
Read the screen that laid out Dragon_Max and change all the memory and do not suffer. The flash does Not guarantee that problems sometimes adds new ones.