Artifacts (Forza Horizon 3)
Hi all, Config PC profile, windows 10. 1903. I hate pirates, busy with the launch, and there is
TBo9I_KoPoJIeBa
probni demo if you can, in store for Mike zero rubles, if everything is normal then the value of the case pirates.
TBo9I_KoPoJIeBa
Is texture lag. It's in the none.
In the best case, just not the video driver. Solution is a full install video driver from scratch (ie delete first, then put on clean).
In the worst case, overheating of the GPU on the graphics card. Method of detection - during a game, run MSI Afterburner to measure the temperature of the chips. Google it. the critical temperature of the chips of your card. Compare and if it is exceeded or reached critical temperature - to carry in repair (and pray to all the gods for the best outcome) or just throw the card in the trash.
-----
Forza Horizon demanding on the graphics card. Even if in other games you are all well, it doesn't mean that Forza is broken. If there is SUCH artifacts (as in the screenshots), the case pipe... Judging by the artam, the probability of failure of the chip 80%.I really hope that the graphics card is still under warranty, otherwise, it will fly...
PS In my experience, will say that the card line Palit, the average quality of the cooling. They are much superior to the MSI, but are far behind the Gigabyte. Their weakest point is the thermal protection for the chips and power circuits. For good, when buying cards from Palit, it is necessary to disassemble the card and re-apply thermal paste and further protect the circuit. If you knew how much I suffered with these cards... But it is at least not shitty MSI, so chances are good the outcome is, even if the overheating problem.
It is a pity that in the market there are no cards with acceleration from Firing and ohladom from Gigabyte - it would be perfect...
TBo9I_KoPoJIeBa
just in case, do a sweep. the temperature of the card. The artifacts are very similar to those that fly with the overheating of the chip.