rx 480 8gb error 43

zuuc
There is about usb for the most part and I'm talking about the video driver and video card

6. 6.Sometimes, to correct the error 43, required a BIOS update .

see what changes are made, the wood above the 16.11.5. the reason is there somewhere

zuuc
Here is the BIOS too I think but I can't find the custom,and the latter is really want I still try to reflash , and the legs on the socket everything seems intact and not creased

custom suggest, unable to even more problems, until premenopauznogo devices

MrNeo wrote: the legs on the socket everything seems intact and not creased
And here is the processor here is not exactly where

zuuc
well looked VIDOS that if the socket paws gnutye it is PCI not on full power working,and so all the troubles were all the same think that PCI gives the x8 from here and misfortune ,or, in the BIOS although there searched

And so, Rachel,the problem with the drivers if someone need it in 16.12.1 enabled BIOS and check if mods are (although I overclocked) that the error was acting on instruction
Спойлерhttps://www.techpowerup.com/228536/amd-bios-signature-check-re-enabled-with-relive-locks-out-polaris-bios-modders

but it remains to solve the problem of why PCI is running at x8 instead of 16

And how do you determine what tire works on the X8?

zuuc
using GPU-Z

Sounds like it should be. the fee you have PCI-E 2.0 video card PCI-E 3.0. Bandwidth Vidic higher bandwidth charges. That is, your VCR may not need all 16 lanes to get the maximum throughput of the Board.
PCI-E 2.0 (5 GT/s) Bandwidth on the x16 lane 64
PCI-E 3.0 (8 GT/s) Throughput on x8 lines 63.015

GPU-Z shows PCI-E graphics card and not the Mat. Board

zuuc

In the BIOS tab of PCI-E?

DarknessCM
Init Display First
Express graphics card.
PEG Sets PCI Express graphics card on the first PCI Express x16 slot (PCIEX16_1)
If about it it is on my pci express 1x16

MrNeo
so what is Windows missing, with ATI it's always been, remember how much)) Sometimes even manually had to register...