3 New Notifications

New Badge Earned
Get 1K upvotes on your post
Life choices of my cat
Earned 210

Drag Images here or Browse from your computer.

Trending Posts
Sorted by Newest First
M
Mishania1987 28.06.20 11:38 pm

materinka vs processor

pull the motherboard Biostar P965 775 CPU Intel Celeron E3300 2.5 Ghz socket 775 . 4 GB operatives. and 200 GB hard 350w power supply.
14 Comments
Sort by:
M
MunchkiN 616 28.06.20

I wanted to write Yes but can it not
nor the fact that this chipset has support for 45 nm processors. therefore it definitely will suit KOR Douala, the first generation of 65 nm or more nanometer processors vplod to 4пеньков on this socket.
you can certainly poletti on any bourgeois sites and look for facts about the work of these assemblies under the chipset to do but I'm lazy.
if the latest processors supported chipset via update BIOS then this Mat Board that this firmware can not be found.
and finally voschem the meaning of this pitch is very questionable here. even purely for work with letters.

M
Mishania1987 28.06.20

advise percent under the mother for Word of Tanks.

R
Ryazancev 28.06.20

Mishania1987
http://biostar-russia.ru/mb/introduction.php-S_ID=197.html#cpu
choose from the list.
I understand the processors made after 2007 will not work.
For tanks this platform old!

M
Mishania1987 28.06.20

I in this business boom-boom here and asked. and for reference thank you

M
Mishania1987 28.06.20

I have right now is intel celeron 1.6 2in I want to apnut vidyuha 512

R
Ryazancev 28.06.20

Mishania1987
you have my condolences, but for the tanks is not enough.

M
Mishania1987 28.06.20

and what's the most powerful you can get in? if not misused.

M
Mishania1987 28.06.20

know schschas! ganyayut minimum fps50-60 100-120 ping

M
MunchkiN 616 28.06.20

Mishania1987
under it the powerful cortex Quad 6600. core Duo 6700 and е6600. if I'm not mistaken.
all 45 nm and bus-1333 instead of 1066 and 800 to work on this chipset most likely will not be full.

M
Mishania1987 28.06.20

please write the full name of the processor which is the best for this mother. Thanks in advance

V
Vasek Vasekk 28.06.20

The best is any Xeon processors(it supports SSE 4.1) x4 65 nm. but for this we need to update the firmware.
I think the author did not make.Seoni Ali Express cost a penny.
All this flash - properly insert the PERC, etc ... definitely not for newbies.

And so without risk it is better to take a flea market or on ALI
Intel® Core™2 Quad Processor Q6600
(8M Cache, 2.40 GHz, 1066 MHz FSB, 95W) and overclock to 3.2 Hz.

V
Vasek Vasekk 28.06.20

MunchkiN 616
45 nm will not be 100%.

M
Mishania1987 28.06.20

thank you very much, and how will take percent help to disperse? if video, I would be broken up

B
Bombardirovschik 28.06.20

I'm under the Celeron