can't raise the voltage.
Hello, please tell me Where and how to raise the CPU voltage, the tab extension setting voltage, No line on the CPU voltage. Motherboard z77m d3h. The voltage of the processor at the moment, 1.14 v.E288888
Familiar BIOS, as I worked with him. Hammer in the search engine z77m d3h review, and out of the article, choose, and look, there is bound to be considered BIOS and find a suitable line, this is the first example, there it is:
Спойлерhttp://itc.ua/articles/obzor-gigabyte-ga-z77m-d3h-materinskaya-plata-na-intel-z77-za-100/
In General, you can switch, like 3d mode is called, where the Mat. fee in the form of pictures, and click on processor, there are all its performance.
These figures can be manipulated using Easy Tune 6.
E288888
Try to flash latest BIOS!
http://www.gigabyte.ru/products/page/mb/ga-z77m-d3hrev_10/download/
MIT>
Advanced voltage settings
Cortex CPU Voltage Control
VOVAN WOLF
In the review that you gave the link too, no need to line (voltage processor). And in the instructions from the office. the website either.
Probably just an old version of the BIOS.
E288888
This model is completely cut tripe overclocking from the BIOS. The other mothers on the same chipset is present.
The most budgetary model.
Ryazancev
Спойлер1) Threw, as an example, such sites and videos, surely enough, with a detailed description, you found better.
2) On the site here, under Voltage, isn't it?
Spoiler
Although, now, already, it does not matter. I had this BIOS (GIGABYTE Z68), a very simple, yet quite useful, especially in 3D mode, dabbled as that set up, nothing complicated there.
Strangely, and perhaps visually different versions of the BIOS are different. There is only ruled by compatibility, overall his work. I did not see the difference after the updates, neither MSI nor Gigabyte at first glance, all the same.
This model is completely cut tripe from overclocking BIOS - wow, imagine that. Mother, apparently not meant for overclocking, though it is strange, why cut it.
E288888
Well, the youngest solution based on the Intel Z77 Express is GA-Z77M-D3H:
PCI-E can only work according to the formula X16 PCI-E 3.0 + X4 PCI-E 2.0, respectively, there is no support for SLI. The maximum curtailed power Converter of the processor and the cooling system of the motherboard.
Read more: https://www.overclockers.ru/lab/46850/obzor_i_testirovanie_materinskoj_platy_gigabyte_ga-z77x-ud5h.html
Ryazancev
Understood thanks for the help. And it may even slightly raise the voltage? Is there such a function?
Judging from the article
http://itc.ua/articles/obzor-gigabyte-ga-z77m-d3h-materinskaya-plata-na-intel-z77-za-100/
Unfortunately you don't raise or anything. But without raising the voltage there reaches the normal frequency (4.4 GHz). Some people Take 4.5
E288888
You have my condolences for this reason. Can stone no luck. Maybe something else.
If you do not know even how to raise the voltage in the BIOS, I think this decision will be your last on this computer :D