Configuring and overclocking. hispanice
Hello friends. In General I would like to set\overclock this bucket. waiting for help supportmother ASRock G41M-VS3
RAM elixir m2y2g64cb8hc5n-cg 2gb
Intel Pentium Dual-Core E5800
videokarta Radeon HD 5670 Series
recently began brake terribly, even old games that were playable on this hardware. mafia and GTA just out of the question :D
tried to overclock through the BIOS of growth is not felt from 3.2 to 3.7. then why it is not.hispanice privet
tried to fight with the timings but nothing not understand. in CPU-Z shows the frequency of 400. in 1333 the writing is very strange. asked around like. it is said that the mother keep 1066.percent 800. that is where at least 800 of these I would like to know.
want to see your offer at a reasonable nashomu with minimal costs. don't want to break up with him old man had served faithfully for 8 years
Lule kid about the crackdown and asked him then what that percent vparivayut
е6600 I had and it accelerates in an easy to 3GHz and 1333 bus. such a performance was not pretty then
if slapped percents with the bus 1333 it will be finechem TK then the acceleration will not go.
if you vperdolit square 9650 its acceleration so there will not be possible. to install Xeon the couple they need to hook up. so statenet.
if finally this Mat Board for the purpose of overclocking and there are configurations for memory timings
about the 775 socket ought to forget if you don't use it to antique adhanah.
but if this upgrad to invest better then just on the Amud FKH system to collect or атлон2 PM2 socket
asgg wrote:
It is characterized in that: the 800 vs 1333 bus, cache memory 2MB vs 6MB, support for sse4.1
And replace free
If for free then let me but the performance is not particularly adds but Xeon E5450 just add because it is a 2 processor that you want him to deliver.
asgg
I do not understand your question. What about the fact that replacement е8400 will give I already wrote above, in fact the performance will remain at the same level but the replacement for the Xeon E5450 will increase.
Here is an example
red E5800 blue E8400
And as you noticed significant, so that there is at least some significant difference in performance?
Although if you let them free changes, the difference still can not see.
MagicHero
It tests at a speed of 5800 3.2 and 3.0 have the 8400, but the 8400 is not bad to Konitsa to 3.6. Draw conclusions
MagicHero
well, I dispersed it is 3.71.. I heard. going to buy more RAM. and take Hyeon. there is a BIOS CeTO hemorrhoids it seems. it's alarming
qwerty830x
In the video which was given, the author pointed out the site where to download the BIOS. Percent in Russia to buy but more expensive in 2 times, either in China
Спойлерhttps://ru.aliexpress.com/item/socket-775-Xeon-E5450-SLANQ-Quad-Core-3-0GHz-12MB-1333MHz-works-on-LGA-775-mainboard/32729171396.html?spm=2114.10010208.1000014.4.3dWnbk&scm=1007.13338.60375.000000000000000&pvid=fe14d4d8-4ebc-4547-880a-b5326b5612d0&tpp=1&detailNewVersion=&categoryId=708042там everything is already done to percent established in the 775 socket. You only need to download the BIOS for your motherboard it is.
asgg
5800 is too General, being followed.
MagicHero
mother ASRock G41M-VS3
to my exactly where to download it ? don't just soar
qwerty830x
Here http://genius239239.myweb.hinet.net/771/, there you will find the name of motherboard G41M-VS3.
qwerty830x
there is a jamb with a link, in short, the comma added, although I did like the offer, there is a comma remove or click here http://genius239239.myweb.hinet.net/771/
qwerty830x
MagicHero you all right advised.
From myself I will add that on your Mat. weak Board power subsystem CPU.
Therefore, overclocking (especially the 4-core option) especially do not play!
The radiator of the North bridge, too, no. It can be replaced by a large, copper from gigabites Board ventilatory. Is ~300r. but hard to find.
Kirlusha
mother supports 4-core, so shouldn't be a problem, I also on the motherboard has no cooling on the power subsystem and nothing percent overclocked from 3.5 to 4.2 and it works so for years. With the motherboard in that time there were no problems.
MagicHero
Well, you didn't have. And I have a extra power connector CPU melt down!
But on the EP-45 DS3 c eight-pin connector, so no problems.