Overclocking Intel Core i5-2400
Dispersed Intel Core i5-2400 to 3.7 cooling ZALMAN CNPS8900 Quiettemperature 65-70 under load , not die the percent ??? ( so it reboots and glitches ), who broke up these stones, write your temperature
I have it narisovanye at this temperature runs for five years. As the dispersed? Also want. Without the letter To percent like are not looking.
And whether the acceleration of the percent? Probably more important is the combination of processor and graphics card.
All about overclocking, memory and CPU.
nikita2112
All depends not only on stone, but it is very important that would the motherboard and RAM was also overclocked, I'm at such dispersed without overvoltages in the BIOS just set the values adjust cpu ratio not the 31 - And 37, ( max 38 in the BIOS settings )
That's the whole overclocking after reboot, respectively, the frequency became 3700, plus the RAM I also started at 1600( just in the BIOS chose the required values of the bus )
My iron
Intel Core i5-2400, 3700 MHz (37 x 100)
MSI P67A-C45 (MS-7673)
Kingston HyperX KHX1600C9D3/4GX 4 GB ( 4 PCs )
Gigabyte Radeon R9 280
SSD 60 SPCC Solid State Disk
Western Digital Caviar Black 1 TB
asbarton wrote:
MSI P67A-C45 (MS-7673)
OPA-OPA! I have almost the same. PH67S-C43. Will try to paszamant.
.png)
Rad1k
Cool !!! the main thing that consistently worked, and the temperature is low, it means I have stone so that I have a 4 core always 6 degrees hot the rest of the ( replacement heatsink and thermal paste did not fix the situation )
asbarton
You can't overclock. In the BIOS the max multiplier х34, but when I put the PERC still works on the x32. Measured in CPU-Z and MSI Control Center. The RAM is also not to disperse. The modules can work at 1600MHz, but the motherboard only supports 1333. Although the box says that it supports 1600 in overclocking mode. But how to disperse not clear. Base frequency of 100 MHz and it is not regulated anywhere. All BIOS have been everywhere and not found.
nikita2112
The motherboard is what? I have memory modules module Name Kingston HyperX KHX1600C9D3/4GX - 1600 easily worked, but when I added two more strips the module Name Kingston HyperX KHX1600C10D3/4G newer 1600 is not working! What kind of iron do you have ?
nikita2112
So now don't know what RAM to do it , sorry, but I will sit on the 1333 bus
asbarton
Wrote above, MSI PH67S-C43 and Core i5-2400.
I kind of found how to overclock, you should disable all energy-saving technologies and to increase the design matters in the BIOS. Then if you set the multiplier х34, the percent operates at a frequency of 3400 GHz. However, there is a problem in the game. In Armored Warfare began small lags and the frame rate has dropped significantly. Returned the BIOS to default settings and the lag was gone. There temperature some misunderstanding. Asked on otvet.mail.ru but anything intelligible did not answer me. Here I copied the question from there:
Intel Core i5-2400, Mat. the MSI PH67S-C43. Under load the temperature of the cores 57-65C, and the temperature of the CPU reaches 117C. Measured in MSI Control Center. When I turn the stress test, the temperature of the cores immediately drops to 52-55C and the temperature of the CPU is kept at 117C Yeshe few minutes and below 100C for a long time not falling. Why these temperatures are so different? Is it dangerous for the CPU? What testimony to believe? What is going on?
Augmented 6 hours ago
Disassembled the computer, cleaned up the cooler (it was covered with a thick carpet of dust). The temperature of the cores under load dropped to 52-62С, but the temperature still climbs up to 117C in a simple 63С, core in a simple 39-44C. Hand touched the cooler heat pipes at the base of the hot, long hand hold fails, two seconds. Probably 50-60 degrees, but I'm not an expert in temperature measurement with the hand.
Augmented 6 hours ago
HWMonitor shows the CPU about the same as that of the cores. It turns lying the program MSI Control Center?
Why, then, in the BIOS the CPU temperature is 56 degrees, and after loading Windows 43S? The idea is in the BIOS the temperature should be lower, because percent generally does not loaded.
Maybe you know the answer?
nikita2112
see the maximum temperature officially 72.6°C
I broke up without turning off the technology, just raised the multiplier the multiplier of X36, right now, any higher is not higher than 3.6 are not getting all smoothly , 66-70 temperature is not higher and the temperature in my BIOS is also higher, despite the fact I have a 4 core hot first 6 degrees , but generally disperse less than 20% is considered to be not profitable , I think in games we difference do not see, just for fun,!!! You agry one temperature ??? maybe because of the motherboard sensors are not right,
Be careful with high temperature will burn nafig percent more, and what radiator do you have? changed the thermal paste a long time ?
Rad1k
http://ru.gecid.com/cpu/intel_core_i5-2400/?s=all
It is a reality, and you seem to photoshop
asbarton
I have this link already three times read before you overclock 2400,I have nothing to do at leisure photoshop )))With i5 2500k I also photoshopping of grain you))))
.png)
xxx and 2xxx series, like the most tenacious in terms of voltage and temperatures, so don't bother
another thing is that the 2xxx nurse that I saw some trash mostly but the acceleration is not particularly large
and the bakery of aging peck-peck