Screwdriver for the hard drive

Shadowarm
These screwdrivers are usually sold in sets. Separately to find quite problematic. So you can buy a set and there is some kind of fit.

Protocol10
Expensive,set like this

Shadowarm
Well, Yes. Googling for Internet shopping. For 500 rubles, maybe somewhere you can find.

Screwdriver type TORX, size itself will select experimentally.

Muskrat
Tobish to take the HDD,and stand to try it on?

Shadowarm
Well, you could even shown any bolt, I'm a psychic or what?
Try T7 or T8.

Muskrat
Спойлерhttp://www.nix.ru/autocatalog/hdd_seagate/HDD-1-Tb-SATA-6Gb-s-Seagate-Barracuda-ST1000DM003-35-7200rpm-64Mb_126769.html#gallery=2258&pid=2258

Shadowarm
Here's the set, what definitely will suit 5 to 8.
Спойлерhttp://www.ebay.com/itm/Torx-8-1-T4-T5-T6-T7-T8-T9-T10-T15-/190978842189?_ul=BY

Shadowarm
In General, the following picture shows which screws the asterisk six-pointed, not five-pointed.
p.s. if the fan perspirati, it is better to buy a normal set.
an example of such. he is not expensive and a lot of things. ya xun yx-8017а https://market.yandex.ru/product--ya-xun-yx-8017-a/13070164

Normally Unscrew a normal flat head screwdriver.

grind off any small screwdriver, so it was part of the star, and twist.
Sets in the Chinese markets sold 100рэ per set, or less. even in stores such as one price is also there

BLADuMuP
thank you