Problem!!!! Hard
Good afternoon. The bottom line: a couple of days ago the drive was slow, very slow to work. The disk is used for films, photos, etc., not under the system, loose ~10 %. Folders and files open long games, in fact, on the boot screen is not coming. Ran CrystalDiskInfo. Took off the skins of both discs. Indicators of interest to drive better on areas of concern than healthy (correct if wrong). Actually, what could be the problem and whether it? These values should inspire fear? And Yes, the next run they declined. Thanks in advance.Spoiler
Spoiler
you can take a blank disk and start to back up the files you need. bhed not attending as far as I remember
Partially bhed can be cured. To do this, the disk controller marks them with unstable and takes a sector of a backup area, but it is, of course, limited. But something with this drive is a horror, according to testimony. Feels like its spinning-wheeled during operation, but the gyro sensor, nothing fixed. Theoretically could occur, the depressurization of the hull and could there be dust, for example. But it is in theory. So personally, I don't know why. The only thing I could advise is to drive Victoria drive in Advanced Remap mode after taking a backup of important data. Well, it's better to do not from under Windows, and, for example, from a bootable flash drive.
Imperator1
Tell me the size of the disk and run a scan of Victoria with a boot disk.