The problem with fx 8320 (2.9 GHz-3.5)
Hello! Today I bought a 8 core processor AMD fx 8320 with a frequency of 3.5. After installation in the computer properties shows only 2.9 GHz. What the problem might be? The games also became quite sink fps, prior to this was a fx 6300 and fared better. Help, please.Well, there are several options for which there is an immediate reset of frequencies.
1) insufficient cooling - check that temperatures. Maybe just not enough of your fridge. Or maybe a mount is broken or something.
2) old mother or a budget nurse. Corny perhaps she Mat.the Board does not support the CPU for various reasons. some simply are not designed for processors with such a heating package. Or if old - maybe you just need to update the BIOS.
3) do Not pull the power supply. it happens, I even encountered such that when connected 1 additional fan - the computer ceased to start. This happens with low-quality Chinese blocks, or simply blocks with very little reserve power.
Also check if on the Mat.Board extra CPU power 8пин, and connected the 4 pin may be the case and in this.
Good - first you need to describe what you do for a machine what the system is, bring a screenshot of the temperatures and voltages in idle and load. Then it will be possible somehow to identify the problem.
TarantinoKV
The firmware of the Motherboard helps, but if he didn't ask - just who did
Stone_xp
Temperature seems all right, the motherboard is old (aida64 shows the name of Gigabyte GA-870A-USB3L v3)
TarantinoKV
model of the motherboard write , just say so... and in the BIOS , (if uefi in bios features) it is clearly be the name , can't go wrong. upd soran current noticed that I had written.... do not hike does not help... http://www.gigabyte.com/support-downloads/cpu-support-popup.aspx?pid=3801 max 8100 keeps.
TarantinoKV
you can try to update the BIOS http://www.gigabyte.ru/products/page/mb/ga-870a-usb3lrev_31/download but on your own. they have there own branded app is ( here they explain how and what.... www.gigabyte.ru/microsites/73 ) have the biggest chip that they update the AGESA microcode processors. well, the new adds to the support. And try Cool'n'Quiet .... Hiking in mengham BIOS , where it is connected to the processor ... and look clearly the name and stop it. there may type AMD Cool'n'Quiet or just Cool'n'Quiet . turn off and see the frequency. the downside is that it will operate at maximum frequency.
KlausBarbie
And which version need to install? I have now BIOS Version AMD 870 BIOS for GA-870A-USB3L F5f
well, the logic f5g ( there is just the code update , minus beta can be unpleasant surprises.) better if you do update the program http://www.gigabyte.ru/microsites/74 ( if it is that will say that the BIOS is not the same and will not update.) plowing under Windows. there on the edge still can bcapote native BIOS)
TarantinoKV
So.
1)the BIOS that I can see, you have last. Because the game will not help.
2)In the list of processors is not needed. the latter is supported by the nurse is fx 8100 on the Zambezi architecture, you're stuck 8320 architecture Vishera that the nurse (if more accurately - chipset) does not support.
So there is only one way out - to change the nurse. Fortunately now they are on b\y the market is not too expensive.
Just before purchasing go to the office site, enter the model and see if your PERC in the list of supported.
Again - this Mamma is not worth raping this percent, it is better to sell it at least for how much is chtonit not fallen off.
KlausBarbie
Fuck BIOS, it will not help. By the way, and disable the cold and quiet. I never understood that mania for disable energosberegenie - why always to propagate percent, causing it to thrash in full? (this is a rhetorical question)
Stone_xp
Yes) it is easier unpretentious mother to buy... the same Gigabyte there GIGABYTE GA-970A-UD3P it would be enough.
program CPU z to see how many digits the processor. his costata needs to be say 100MHz bus times a multiplier of x33. that will give 3300мгц. those what his the stated frequency is dolzhon to be the multiplier.
further, the processor is like turbo frequency. it works not always, and this processor only scales to 4 cores out of 8. she of course will be higher than the actual stated.
is low costata bestelle
it is likely that Prosser is determined not true.
if so all you have to overclock manually to the desired values with disabled turbo
and the technical characteristics of the Mat Board like back to back matches and support Vishera she stated. however, there is a certain probability that Pytalovo just not over the CPU.
MunchkiN 616
No, it's like kicking a corpse - like something to do, but good?
We need to change the nurse it anyway. There may be too many things. not remove for Pitalovo does not support something, persists the controller is determined incorrectly, etc. etc. to Seek out these causes is endless. Just makes no sense, especially considering that the nurse on ам3+, which will pull the percent of runoff can be found for pennies. If you search well, you can find the one, which will it to 4.0 - 4.3 to get rid of without harm to health and without any problems with cooling and the stone and power circuits.
So no, topic can be closed - only then to change the nurse. This is really the most sensible solution.
Stone_xp
to replace something of course the easiest way to solve pitch problems