Motherboard ECS P965T-A

Yes

On off. the website support 4-core processors stated only for PCB version 1.0 B, after updating the BIOS.


Acceleration is no hope.

Father Victorious you pliz me more, my motherboard will fit this percent?
Just in case, describe in detail your motherboard:

The Value Field
Properties of the motherboard
ID 09/15/2006 motherboard-P965-ICH8-6A79LE1CC-00
The motherboard is ECS P965T-A

Properties of bus FSB
Bus type Intel AGTL+
Bus width 64 bits
The real frequency of 267 MHz (QDR)
Effective frequency 1066 MHz
Bandwidth 8530 MB/s

Properties bus chipset
Bus type Intel Direct Media Interface

Physical information about the system Board

The number of slots for the CPU 1 LGA775
The expansion slots 3 PCI, 2 PCI-E x1, 2 PCI-E x16
RAM slots 4 DDR2 DIMM
Built-in devices Audio, Gigabit LAN
Form factor ATX
The motherboard size 240 mm x 300 mm
Chipset motherboard P965

PS Or we can kakoynit another processor for my motherboard do you recommend?

tin plate
Look at the audit Board (on the first page of the manual or on the Board itself), if 1.0 then the Q6600 will rise after update the BIOS-and

Or we can kakoynit another processor for my motherboard do you recommend?
It is time to change the motherboard...

Looked in the computer, it says 1.0 In
and when to update the BIOS and how?

and when to update the BIOS
While inserted the old CPU...
and how?
Skachivaem from the site Editgroup archive firmware... a firmware itself and the flasher... mine... Zapuskaetsa Windows even in safe mode, zapuskaet flasher, cherry-picking the firmware file because of Ok and pray that the b-light is not slashed before the end of the process...
If the flasher does not use - http://www.rom.by/articles/flashBIOSart/index.htm or http://forums.hardlabs.net/index.php?showtopic=936

Peaceman, thanks a lot :)

A good motherboard !!!! Holds 4 core processors !!!! It is 100% !!!!

People still have a question=)) after updating the BIOS which is good(good in the sense for my motherboard) dual-core processors would fit me ;)

after updating the BIOS which is good(good in the sense for my motherboard) dual-core processors for me
The ones that overclock is not necessary. The list of supported you can look on the ECS website.

Damn I looked at the website, updating BIOS is not for my brain)))
And without updating BIOS this processor will go to my mother's:
Intel Core 2 Duo E7300 2.66 GHz 1066MHz 3Mb LGA775 OEM

It is generally 45 nm processors does not hold. Updating the BIOS is no big deal.

where just do you can look of the supported processors on this motherboard after updating? if there is post a link

People...
I understand the iron forum and all that... But! Are on their own not to go to the ECS website and see the specifications of your Board?
http://www.ecs.com.tw/ECSWebSite/Support/CPU_Support_Model.aspx?detailid=681&MenuID=69&LanID=0

Thanks =)

please anyone help I bought a 2 percent .66 1066 bus mother the same p 965 t-a put all and the monitor even nazagoralis what to do please answer

compatible motherboard ECS P965T-A (3 PCI, 2 PCI-E x1, 2 PCI-E x16, 4 DDR2 DIMM, Audio, Gigabit LAN) with the video card asus gtx650-e-2gd5 ???

dimonbatonchic, Yes. PCI-E 1.1 is compatible with any modern graphics card.

The motherboard that I was...not to lie...10 years and though that. But unfortunately more cons than pros.
The almost complete absence of dual-channel mode - It seems to have but have yet to find memory that will work in this mode.
There is support for Quad and Extreme...but try to find them at all...
And in fact the mother herself not to OC...that is a huge minus, as the old stones without overclocking at all lives there)