The problem with the mouse wheel
Mouse: Defender warhead gm-1120The problem is that I'm spinning down the wheel and it's like that back. Example:
Look, you're disassembling the mouse and you see the stick that goes from the wheel to the sensor in the form of a tower framed by a metal hull. You need to take the passages and squeeze it (hull). Just do not overdo it, and try as often as possible to check what has changed, the work is thin. (Recently, so repaired.
ceptey8520
It's not a mouse problem, it's a system. I've tested two other mice and the same thing.
Try to find the mouse in the device manager and remove the device, then pull it out and reconnect it, but to another xD port
Is there something wrong with the system manager? Try to stick it in the other one.
So we reset everything in mouse software, load the discarded configurc into the mouse. Check.
Turn off the clav. Laptop? Maybe there's another sensor. (touchpad, touchscreen)
Other mice were the same manufacturer?
Unviz
My mouse is a friend of the manufacturer, I have a computer. I'll try to turn the Clava off.
I have a problem, too. I poured my cider on the weekend and now the wheel is spinning tight. alcohol from the production of isopropyl took, today I will wash from the goven sticky
Try to play with the sensitivity of the wheel in the system.
Look at the programs the left can like that "filter" wheel. Especially the progs from the mice.
Reinstalling the Windowes. How radical. If there is a life sit in it check the behavior.
I'd understand the comp of the 2000s, the 9th thread with interruptions, but the modern one is cool to be lucky.