Mouse problems

A couple of days ago, tried to connect the controller to the computer, connect did not work, instead there were problems with the mouse (at least with another I can not connect), as the fact: decreased incredibly sensitivity, the button dpi was able to increase it (before that, that would move to 1cm, had to move the mouse all over the table), the mouse became faster, but the accuracy was lost, often began to press, stopped working. , browser, documents). The first thought was that the mouse flew, checked on another computer - works normally, attached to the problem computer a new - the same stuff, the sense flew, scrolling wheel does not work. Tried to load in a safe mode and check for viruses at the same time, in safe mode the mouse behaves just as disgusting, there are no viruses. Looked into the bios - everything is fine, but noted an interesting detail, in the bios mouse behaves normally, and the wheel works there. He began to sin on firewood, in the device manager burned a yellow triangle on "expandable host controller USB3.0" (photo below), rearranged the mouse in usb 2.0, the problem is not lost. Tried to fix the problem with 3.0 however the wood does not want to be installed (neither through the dispatcher, nor through the driver booster, nor in the manual), removed and still triangle. Unfortunately, the system could not be restored, there was not a single point of recovery. Sorry for the messy narrative, just do not know what to look for the reason and how to fix. Windows 7x64. Photo Mouse settings just in case below.