Friezes in games
Good afternoon! I have noticed such a problem that there are friezes or so-called stats in the games. Previously, everyone thought about loading the game, but after a while began to realize that it had nothing to do with it ... Worth Windows 10 version 2004.Iron:
Processor - AMD Ryzen 1600 3.2Ghz (stock settings)
RAM - Kingston HyperX 8x2GB 2400Ghz DDR4 (dispersed to 3200 Ghz. Timings 16-18-18-18-36)
Hard - WD 1TB
Video card - Saphhire RX570 Nitro 8GB (not accelerated)
Cooling - Deepcool Gammax 300
Mother - MSI B350M PRO VD-PLUS
BP - Cougar VTE 600W
Denis Kyokushin
I wanted to, I don't know what kind of stress I was going to put in. And for the first time I'll do it
Denis Kyokushin
I tried it, the multiplier is blocked. The frequency of the processor in the bios is just a little blacked out and everything
Brother 81ns is a lot, we have to reduce it. Delays because of this. Delays are even 75 ns. Try to reduce it. Or change the percent.
Play with timings. We have to make at least 67s delays. Try cl 14 percent to 3.9 in the acceleration and cut down all the energy savings. Safe snug all, up to 1.4in, but undesirable more than 1.35, for the stove will be quite. As a keepsake, it's also 1.4. It is advisable to squeeze all the secondary with the help of ryzen calculator. All the necessary information about memory chips can be considered with the help of thaiphoon burner. A couple of days dig and everything will work out, I squeezed out of my microns d-die 66 ns, which is quite good for these chips.
OakSorcerer
Not all Reisen manages to get through the sub-timemings with the help of a calculator.
Denis Kyokushin
It is understandable, the calculator will not give a 100% info, all individually. Therefore, it is a long process, it is necessary to look manually minimum working values. The calculator will help, will give some point from which you can start.
Denis Kyokushin
I mean? What are the claims against me? A lot of people are adjusting timings using this software. I also succeeded, records did not squeeze, but all plows super stable.
Spoiler
Aida
OakSorcerer
As there will be an opportunity, be sure to try). Learning left simply, the PC stayed at home.
Elidias
I'll try. If I change, I prefer to change my mother again. I've broken it up to 3.8. I'll play with my memory and see
MilkyWay04
Do not change the interest, 3.8 - 3.9 on this mother without problems he will take, and for this video card it will be enough.
OakSorcerer
Oh... processor and need to be changed. One solution to all problems. I sold my 1600, the acceleration above 3900 does not pull, the performance on the flow and remained the level of 2011 and the latency of Samsung b-die will not save it, you at least 3200 C14, and below 70 will not. Above the frequency does not take, and only 3600 gave the best performance, performance and acceleration of the ozu (3466C15) with latency, just below 70, but that's still a lot. There are few successful exemlars capable of at least 3900, there are often only 4000. There's a voltage at 3900 was 1.4. Someone lucky at 1.41 got 4100. We look at the statistics, and don't load the guys, listen to what the elders say. I sold mine for 6000, added 4k and bought 3600, and now happy as an elephant.
What to say, some 3600 itself at 4200 operate at a voltage of 1.38. I have to admit that I was lucky personally. I haven't seen the zen2 stats, but I think it's better there.
MilkyWay04
Percent change unequivocally, there is no need to change anything else. Leave the fee to the mother, and work with timings is always the right thing to do. Beeus for 3600 updated. If the money is tight, then 3500 X will please with the numbers. Forget about zen and zen.