Horse567 13.10.20 11:14 pm

Tower cooler.

Can you tell me what's better for a Tower cooler or a regular CPU cooler? Now there is a processor I5 9600K, Xilence cooler I250 PWM .XC032.

8 Comments

Ryazancev 13.10.20

Horse567 wrote:
Tower cooler
But the cooler cooler is discord. To disperse their requirements, for a runoff with a bead easier, for a drain without a bust tower for 3-4 tubes will suffice.
If you drive, then 5 tubes (copper heat tubes) minimum. Better six. If you drive up to 5000 mgz then you need a two-section super tower. That the temperature was not above 80 grams (in load with acceleration). There is information (ProHIght) that long loads with a temperature above 85 can over time lead to silicon degradation.

semferot48 13.10.20

Horse567
DEEPCOOL GAMMAXX S40, the very one is worth it, there are no problems.

Ryazancev 13.10.20

semferot48
Did you even look at your TDP and Horse567? In the drain, the values are 65 wat (your) and 95 wat it.

semferot48 13.10.20

Ryazancev
And? There at the 130 kuller he has enough for his eyes, if you do not drive to the limit.

MunchkiN 616 13.10.20

On tdp nada look if the acceleration of that TDp procedure can be 150-160 correspondingly cooler under 180-200v it thinks the ceiling and so what who likes

Marsj 13.10.20

The more heattubes with a large radiator, the better.

ArkhAngel of Dark 13.10.20

Horse567
replacement for the tower he though hot air will not blow the mother But on TDP PODBERY AT YOUR SOURCE 95 A COOLER BERI POD 130 W But not exactly as it is now stands

vitalik76 17.10.20

The tower cooler has more dissipated power, respectively, better cools the percent, i.e. the temperature of the entmin will be lower with the tower cooler.