Artifacts and driver problem on video card
That's the problem. There is a nvidia gtx 780ti graphics card, artifacts have appeared, and the device controller has a code 43. The vide kind of works, but the games go in a few frames, plus artifacts on the desktop and in the bios. At first I thought that problems with the power supply, then the hard drives were switched off, the pc itself fell out, yesterday pc constantly hung and solved only by a reboot. Changed the graphics card to another gt 740, at first had the same problems, after a while started to work normally PC. The back of the 780ti card was changed, the pc was not cut down, but the artifacts became more. Error 43 tried to solve, but nothing helped. Do you think it's still fashionable to fix the card or is it no longer a tenant? I have also a claim to BP, perhaps over the years of work began to sag power, but still lean to the problem in the map itself, if the way to fix?Neponatniy wrote:
Changed the graphics card to another gt 740, at first there were the same problems
And you didn't draw any conclusions for yourself? If the problem was only in the map, the problems would go away immediately after replacing it.
Neponatniy
You can fix it. But we need a good specialist. Honest diagnosis of hardware malfunction and donor parts. Get in touch with normal workshops.
But in my opinion the economic feasibility of the difficult repair (diagnosis) is spornnmann.
And it is very difficult to find a normal specialist. Mostly hand-ants everywhere. Only in the cities of millionaires there are people.
Look at the 740-voltages map that the BP is presenting. Maybe he drove off on a 12 volt?
780 hush is very demanding to BP. And you didn't even deign to write a config!