Iron temperatures

SHARIKOV POLYGRAPH POLYGRAPHITCH WROTE:
Without the load, browser 35-37 pace, in games 70 -73 is normal ?
Is that a 1,000 percent? If so, then it's not normal at all. Either the cooler is clogged with dust inside, or the cooler does not drag cool. Pasta's not going to help.

SHARIKOV POLYGRAPH
It's okay not to worry (For your configuration). The second turntable on the cooler a little will throw if you put (Cooler wide, he lacks the power of blowing with one quiet turntable). And if critical, you can feel the lower voltage on the CPU - the most effective way, by the way.
Of course, you can adjust the curve of the revs, but it will add extra noise.

Ryazancev
Dust is excluded - all completely new iron, it may be worth applying another paste per percent and fans on blowing up put, which second turntable can be put on the percent?

SHARIKOV POLYGRAPH
Pasta Bikvait complete - not bad (appropriate to the level of cooling, i.e. above average). If she was a living girl, I don't care how to smear her at all. If it is thick, it is necessary to have a uniform thin layer. The top blow won't slow down much. I bet, but for memory more.
There is a sense in BIOS on a small step to reduce the voltage to the lowest possible value. It's going to help a lot. And that there were no problems with the pair cooler, it is very desirable to put the twin brother. Although if you can customize in software or BIOS. You can take any 140mm. Optimal Termalright (price-quality). There's also Anermax.
If you do not drive memory, you can not sculpt the blower on the roof, it is not useful enough. Think of the heat-pass. If you screw it up a little bit, it happens.

Ryazancev
There is a paste mx-4, to what values can reduce voltage ? Iron new while only mastering, and yes the mother is well so warmed without a load of 40, after the old i7 2600k a little strain the temperature, expected the temperature of the ingos under load about 65 degrees, the second cooler puts on blowing in the direction of the rear fan?

SHARIKOV POLYGRAPH
The second cooler IS to blow into the back wall, so that the air flow from the prenage side of the case two turntables blew the cooler radiator through. You can still put in the back wall on the blow. But this is already for enthusiasts - VRM feeder under the acceleration of blowing.
Spoiler
You go to BIOS, you find a CPU voltage, you eat OFFSET - (MINUS) And slowly you add. So in a week you'll find a stable minimum. This method will drop the most temperature.
I can't say anything about the MX-4, there is a sad experience with pastas from Arctic Cooling. I prefer other ointments, PLEASE!
The high temperatures are 85 degrees. In such conditions, long fry is not recommended with increased voltage!!! T.E. not with stock. Bearded people have a view of degradation. Anything below 85 for modern silicon is safe. And even more so for 14. Intel.
The best option for you is to score and relax. These are normal temperatras. In children on the next computer with a thermo-harvest on 8700K@5000 mtz and Supercooler is the same. Just when it comes to about 80 degrees - turntables raise the revs of the 1000 (1400 MAKS). In games, you have not heard any noise at all. This is only if you load the stronger CPU.
Vaughn for AMD zen2 is generally in order of things. I'm not going to throw a screen, but 80 dropped.

Ryazancev wrote:
it's generally in the order of things. I'm not going to throw a screen, but 80 dropped.
What's going on? You show the people that and you have so that 70-80 degrees on the 4,000th percent is normal.
That also the pasta helps from 70-80 degrees.
This time I cleaned the comp, the pasta was dry, I don't even remember what smeared last time. Only the percent was heated not because of this, and not only the percent. Four months ago, the cooler stopped making noise. The cooler at my head is noisy, because of the fact that his ribs are actively blown, and then the silence came, grace especially in the evening. xD)
And began to warm up to 70-75 degrees in load, and with it and SSD, which next to the instaly stands, began to bask in 45-46 degrees. The reason for this was dust, not the paste, which sat on the walls of the ribs, under the fan and began to interrupt the air flow, so he stopped making noise. And the cooler is not even disassembled, was, now disassembled. )
Screw legs, with springs, and on stop rings that are not removed, had to break them. Now 32 on the course, 32 on the SSD, as in the pharmacy. )
70 degrees is a temper that endures, but it's not normal, and in games it is felt.

lokkie
Config confiscate discord. There are proces with a maximum temperature of 62 degrees. You made a vinaigrette out of judgment again. First, look at the configs (PC builds) of the acceleration settings. Thermopalets, coolers, processors and acceleration. Imagine, it's all different things and their co-occupations in different cases give a different result.
Imagine that YOUR "truth" is a subjective point of view based on the inductive method (personal experience), and systemic knowledge (deductive method) is lacking to be objective in judgments.
No offense :)

Ryazancev
I didn't really get it about the zen2 amude. Did you mean about the stock temperatures or the acceleration? I've never seen a temperature like this. I've never even been in 70. Mummy from asus b550. I'm a percentage with an undervolt under the dashman tower gammax 400 in2. But if my memory doesn't change, he hasn't even warmed up in the drain. And what percentage do you have, that even up to 80 peak was?

Neon Abyss
Let's do it again. "The Stones" are different, each with its own TDP. Undervolts, accelerations, everything individually. Where and 80 in the load will be little, because others on these settings can be all 100 degrees.
Stop arguing.
And yes, my pebble, even at full load, can easily hit 85 degrees with good cooling in the SinemBanch P20. I don't have that high temperatures for my settings yet. T.K. has carried out difficult work on optimizing and grinding surfaces that divert heat. If it is so interesting to talk about this topic - contact Lichka.