DOOM and SLI (Doom (2016))

Felix Bistricker
DOOM will soon receive SLI support (today at 12:37 pm)
http://www.playground.ru/blogs/doom_4/doom_skoro_poluchit_podderzhku_sli-195162/

why run it there? the game works immediately from launch.

Rampertumskin
you know what sli is?

Felix Bistriker
nea

Felix Bistricker

, I immediately had it like this by default, I didn't change it, I started the game and I'm playing, the slide works, I checked it. with one card 115 fps, and with 2 cards 155. Both cards are loaded and operate at max frequency.

SLI works like that, I confirm. At least on Win 10. The game loads both vidyuhi

Rampertumskin
+++++++

sources
++++++++

forgot to tell me Windows 10, but in my opinion it does not affect. maybe this is not a slide, but a patch, but it works and this is the main thing.

There are two 980ti's in sli. In the control panel, sli is turned on. The second current card almost does not load - a maximum of 36%. Moreover, the first loads about 80, although usually the load does not go with such a gap (more evenly), the second sometimes barely loads. (I use the invidia inspector program). But geforce exprience really does not see - the video cannot be recorded. (Windows 7) 30 fps at max in 4K

For those who do not have sli, roll back to 365.10. There sli works fine

People who write something intelligibly works if or not, because if it does not plow, then the game is not worth 300r.

If you enable "3D-> show visual SLI indicator" in the video card settings and start DooM when SLI mode is on, then the indicator is not visible! So SLI doesn't work! That's all!


Spoiler

do not mislead people, SLI works in DOOM and through the Nvidia panel! Later I will throw a screen site that something is buggy.

It was Windows 7, SLI did not work in it, the FPS with two views was the same as on one, and there were some twitching from Sli .. I played for about a week, MSI Afterburning showed that two views were loading, but somehow incorrectly and there was no effect from Sli .. Yesterday I switched to Windows 10 and launched DOOM and it turned out that SLI works in the top ten, MSI Afterburning clearly displays synchronous loading of two video chips .. 2xGTX 770 ..

After measurements on one vidyakhe approximately 70fps, on two 110fps in batches. The quality of graphics is selected average, tk. 2GB of video memory is not enough ..