Which one to take?
16 GB 2400 MHz DDR4 1 piece or 8 GB 2666 MHz DDR4 2 pieces ???If you want a two-channel mode of operation, take two dice.
If you don't want to, take one.
Regarding frequencies, a particular performance gap is imperceptible in everyday tasks.
Kirill120
2, 8 GB each , itself costs only less MHz and DDR3, I'm happy with everything
Kirill120
Would take 2 to 8.
BUT in such cases, several negative points appear.
1) Two planks will cost more.
2) 2 slots out of 4 are occupied. And in cases where I will raise the RAM to 64GB, I will have to attach two unnecessary bars somewhere.
I wrote about the number of slots and noticed that you did not indicate your checkmate. board, because if it has 4 slots with a maximum volume of 32GB, then 16GB of one bar will not fit into the system, because for 1 slot a maximum of 8GB will be available and the reasoning about what to install will disappear by itself.
kym1000
2 planks cost less than 1 x 16gb , 2 slots on my motherboard and everything is free
Kirill120
Write the name of the motherboard, the number of slots in no way says how much it supports as much as possible.
Kirill120
Does your processor support 2666 MHz? Judging by the question, then most likely you do not even support 2400 and is it possible to insert DDR4. Do you think the RAM will fit into any system?
it is better to take the same ones as they are, if they cost 8GB each, then it is better to take 2 more slats of 8GB each.
GG4
That, too, for this reason I knock out the name of the mother from the vehicle.
And then he set the task, but did not give all the input.
warp 37
Why? There are stones with a built-in vidyuha like amd a4,6,8,10 there a lot depends on the speed of the operative