Lock at 15-20 fps (Cyberpunk 2077)

There is vertical sync in the game settings and there are numbers below 30.
And so to increase fps and remove noise off. quality of reflections.

Marsj nope
, I already tried to turn off vertical synchronization, and just a limitation in the settings, nothing,
and as I said, it's not in the graphics settings, because what's at the minimum, what's at the maximum is 15 fps

the same vidyaha and the same amount of operatives, only a different percentage. I play at 75 fps (vertical sync)

Yaroslav Bondarev
so I also say that some kind of nonsense is obtained, there cannot be 15 fps on such hardware

I can't say anything about Risen, nor when I didn't use them, but on my system (i7-4790, 1070ti, 32ram, ssd) 40-50 fps is acceptable, not without drawdowns, of course, but it's quite comfortable to play.

Of course, I am not a computer specialist, but I have two versions, either the percent cannot cope with something, or the hard is too slow.

By the way, look at other running processes

_Red_FoXx_
It can't be that 8/16 percent can't cope with the game)

Marsj
I don’t argue), I wrote above that I don’t understand reisens)

foka_zz
some kind of GAME. at 2600x, 2060s, 32GB, all are 45-60fps at 1440r, with PTX and DLSS turned on. without rays below 55fps does not fall, but the picture is so-so.
Did you fix the fix from the nexus for Amude? maybe the Poles under 1700 did not want to cut the optimon?

foka_zz
can a virus?

The baker is
most likely in the process and there is a problem, before that I tried to play on the old man with the FX 8320e and 1050ti, even there it was 30-40 fps, and then something went wrong
I'll try the fix, thanks for the advice

Try to optimize Windows, disable the paging file or make it bigger.

foka_zz wrote:
Comp, if anything, though not the most powerful, but certainly not 15 fps: Ryzen 7 1700, RTX 2060, 16gb RAM
RAM, if one level is a problem. If two swap places respectively 2 and 4 slots or 1 and 3 which you have are responsible for the dual.

foka_zz
It is necessary to mod put a cyberpunk twix something from the nexus. There is also an interesting mod for more precise settings

foka_zz
I have 1600af rizen and 1080.
the same bullshit. Lock 15-20 frames.
And I noticed the problem after the cursor appeared.
- I mean: The game starts 60 frames. The cursor appears in the game and 20 frames.

I'm waiting for the "release" of the game ... that's it.
ps what kind of motherboard? sit on asrok ab350 pro4

TarakanchEg
It's already April and everything is the same.
The same situation, lock on 20 frames is stable. Both at ultra 20 and at minimum. I put all sorts of patches for amd, programs from the nexus, merged all the settings into PM. hidden, a total of one 20 frames.

Iron is:
Stone - ryzen 5 2600
Vidyuha - RTX 2060
Mother - Asrock ab350 pro 4.
The game is on ssd.

I watched the tests in the game of the same assembly there at ultras 50-60 fps in full hd.
If someone has solved the problem, let me know.
So far, apparently, either wait for patches, or change the stone.

Chepacz
o. I have exactly the same mother and exactly the same stone)
Very interesting ...

And yes. There are similar thoughts to change the stone. In fact, you can put 3000 rizen in ab350. Bios allows the latter.

TarakanchEg
The only thing that confuses me is the presence of tests on the same assembly where everything is fine.
A friend with the same stone but with a different mother and vidyuhoy RX580 with the game is fine. So xs and so the card was updated before the release ... So maybe there is something else a problem ...

Here is an example of tests on the same hardware, with the difference just that the RAM is smaller.

Chepacz is the
last stronghold - the motherboard)
In any case, I see no reason for myself to play cyberpunk in the near future.
Let the patches fix the game for now. To spoil the presentation of the atmosphere from bugs - not very much

Cockroach
Similarly) Since December we are waiting for patches and still wait) Although the solution to the problem is still interesting.