Problem with gamepad (Dark Souls)
In General, decided to play with a gamepad and found a problem I have on right stick control investirovanie: push left the camera up, right, down, up, left, down - right and the management of change seems impossible.Can not understand how to fix it?Joystick ps 2, ps 3 - like(Defender).Same garbage on saitek 480 went and bought a defender racer x 7 and all good
Oh, and don't care.Still have the keyboard and mouse are used to...I do not know how.
For those who do not plow x360ce.
1) Open x360ce.ini
2) FakeAPI set the value to 1
3) put the VID value is the Vendor ID used controller
4) PID set value, the Product ID used by the controller
5) Save and close x360ce.ini, run and play in the DS =)
How to know VID and PID of your controller?
1) Press Win+R
2) Enter the dxdiag and click OK
3) In the contribution Input\Input find the right controller
4) the VID is vendor\Vendor ID, PID product Code\ProductID (both values are of the following form 0x0XXX)
I x360ce needed in order to fix the inverted axis on my cheap gamepad =) Put a minus (-) before the number of axis that should be inverted.
the question how to make, that the game had not seen a gamepad? disable to run the game. (
then to the most joy keys to assign using joyTokey or xpadder
PS just MNU button less and the second analog no joytokey saves
Dmitry.ru
No. Unfortunately this game is not of the quality for which it is necessary to give money...
Dmitry.ru
Crack from Fairlight
xxxevgen
To one of the assemblies x360ce attached file dinput8.dll who hid controllers incompatible with xbox, game. Not sure it works on DS or not.
In other games x360ce works fine. And this, well, actually sees. Because of this I can not adjust.
Dmitry.ru
For whom I wrote above? :D
For those who do not plow x360ce.
1) Open x360ce.ini
2) FakeAPI set the value to 1
3) put the VID value is the Vendor ID used controller
4) PID set value, the Product ID used by the controller
5) Save and close x360ce.ini, run and play in the DS =)
How to know VID and PID of your controller?
1) Press Win+R
2) Enter the dxdiag and click OK
3) In the contribution Input\Input find the right controller
4) the VID is vendor\Vendor ID, PID product Code\ProductID (both values are of the following form 0x0XXX)
Some games need to setup this way, for example Trine and Trine 2. Just edit the config and here's happiness =)
Lycanyte
Anyway, the game executes other commands not those that are clogged using this prog, MB makes other programs so you can configure the control pad.
Even so I advise you to take X-boksovskie pad (or compatible), and not steamed. Miser pays twice than to take a Chinese tripe, and tormented with the prog emulators, and other Elda, it is better to save money if they do not, and buy a normal thing that will truly, and everything fits. He took a Razor Onza and happy