Guys help, can anyone know what the error is?
A friend asked me to make a PC for him, his netbook broke, I took up this business, because he himself does not know much about it, I certainly do not ice in programming and repairing a PC either, but I can reinstall Windows from BIOS. So my problem is this, I reinstalled Windows through my laptop, inserted its hard drive into my own, installed it, put the HDD in place, and then ONE. Yet even the computer does not boot the PCIe error of the FE the Family the Realtek Controller software the Series v1.25 (04/19/11)the PXE-the MOF: Exiting the PXE ROM drive
the Reboot and the Select Proper device not boot
or not boot the Insert media in selected not boot device and press a key
the whole head itself I broke it, I can't understand what the error is and what is it connected with, maybe what has burned out on the motherboard? I don't know what to do, who knows please tell me.
And why did he pull out his disk and shove it into his laptop ???
On his netbook it is not destiny to reinstall Windows ???
RusPack1295
You installed Windu through your BIOS on its disk, that's the problem !!!
bazilews There is no floppy drive on the netbook, but it also has some kind of unpretentious BIOS, and there is no installation function from a flash drive, so I had to do this, but the Windows installed, and went, but there was some kind of error on his netbook pops up
Pzzts lol.
So they put 98 Windu / HP.
Starting with Vista, there is a binding to all components.
Why do you try to help others without even having simple basic knowledge.
bazilews Is this the reason?, I don’t know what to do, now I’ll send a screen of the BIOS.
RusPack1295
Do not drive, you can install it from a flash drive on any device, look better.
I took a picture of the wrong tab)
read this article http://blog.fc-service.ru/hardware/boot-menu.htm
"boot menu" will allow you to boot from a USB flash drive, then you already know what to do
you can download the program for installation from a USB flash drive, create a bootable USB flash drive and put the system directly on the desired computer from it
http://user-life.ru/poleznyj-soft/pyat-programm-dlya-sozdaniya-zagruzochnoj-fleshki.html
b1mbo
MU-admin
Vasek Vasekk bazilews
Sorry, there
were problems with the Internet network, I wanted to send all 5 tabs, but oh well, here is the Boot tab
Vasek Vasekk,
in general, I chose the flash drive in this order, and what next ?, I save all the changed parameters, but there is no loading windows
F10 BIOS settings are saved.
The Windows image on the USB flash drive must be written correctly.
I write through the Rufus program www.ex_ua / 88013296 (_ remove and put a full stop)
Also, if it is written correctly - try to poke into other usb ports.
Mr. Dude
In the boot option priorities tab there is a USB Flash Drive PMAP and Realtek PXE B02 D00, and also disabled.