Modes.

The memory strips must have the same bus frequencies and memory timings. It is advisable to use RAM of the same model from the same manufacturer.

Horse567
even if 2 gig votknosh second it will

Marsj
ask one, you are responsible for another, and so if you do not chase records overclocking, even 2 different plates that are individually good race, a couple may also be easy to take the normal frequencies and timings

The frequency and timing are the same, everything is clear, thanks.

SPR1GGAN
And you will have a collective farm. The dual channel will operate at the speed of the slowest module.

Marsj wrote:
And you will get a collective farm. The two-channel will work at the speed of the slowest module,
in case I inserted it and forgot it, but in my opinion I wrote adequately about overclocking
, for example, 2 dies of 4 were at 1333, and then I bought 2 dice for 1666 in a couple of years and as a result this venegred I'm now working on 1800, I bought them without even knowing about overclocking, I overclocked them in general a couple of years ago, only

modern DDR4 will be enough for 3100 comfort and almost all normal dies take them

One says one thing, so how is it better? The clock frequency is 2666 for both 19, okay?

Horse567 is
okay, to drive up to 3100 with 17 timings, it will be generally gorgeous

SPR1GGAN
Unless it has some B-chipset for Intel. Which is very likely.

Deshang
will then enable any available XMP