3 New Notifications

New Badge Earned
Get 1K upvotes on your post
Life choices of my cat
Earned 210

Drag Images here or Browse from your computer.

Trending Posts
Sorted by Newest First
B
Boogeyman_1408 12.04.21 11:03 pm

Repair video card

They repaired my video card, the mosfets burned out and they said that you can not load 100% like this?
9 Comments
Sort by:
L
Lex-one 12.04.21

Boogeyman_1408
Was the repair under warranty?
Or Vasya from the basement?
Well, do not load 100%, which means the load on the chip must be 99% or lower. Ie turn on the vertical and lower the graphics settings.

B
Boogeyman_1408 12.04.21

Lex-one
Is it possible to throw off the purity and then load the card

M
Marsj 12.04.21

You can underestimate the power limit (afterburner, driver, etc.).

B
Boogeyman_1408 12.04.21

Marsj
i throw off the video

B
Boogeyman_1408 12.04.21

Marsj
End of video look I had the same problem with the video card

S
Subaru MotorSports 12.04.21

Boogeyman_1408
You can limit the number of fps, 60 or less, with Riva Tuner, it is installed with MSI Afterburner.

L
Len4ik00N 12.04.21

Boogeyman_1408
If the card cannot be used at 100%, then it was not repaired, but rather "patched up" by disconnecting one of the power phases (or several). Although, given the current prices for video cards, you are still lucky to have done so at least. In order not to overload the remaining phases, it will be easier and, probably, even better, to limit the powerlimit through the software that is used with firewood, or through Afterburner

S
SPR1GGAN 12.04.21

Boogeyman_1408
so in the video it says everything, how to undervolt it and does not say anything about 100% load, after reducing the power she has, and so her new 100% will be like 75% before repair

S
Subaru MotorSports 12.04.21

Boogeyman_1408
It seems to me that it is not the load that is dangerous, but the temperature that occurs during load, it is logical to improve the cooling of the video card: change the thermal paste, increase the cooler speed with the MSI Afterburner program, I have a straight line after 80 degrees, the cooler speed is 100 percent.