Video driver crashed and was reset (Days Gone)
Who had this error? How to fixologolova15445
Well, if so, then yes, the lock limits performance. It turns out a solution - it's stupid to limit fps to 60
Chesh1rCat
If there is not a lot of FPS in stock, then it can take off. The frequency will sometimes jump to the maximum and randomly like that. If you're lucky, it won't fly out. I could not fly for two hours at 2088 MHz (1999 in stock).
It crashes on 3060ti, I didn't put the lock because I didn't play at 144 Hz at 60 fps, I didn't roll back the firewood either, I think I'll wait for fixes ..
There was a problem with the video driver 1080 crash immediately at startup, settings vidyahi set these parameters, start, flight rules
Spoiler
MarkusRush
Here I also have 144 with g sync, well, in principle, playable, although worse of course.
zeak
You just turned on vertical sync, the rest does nothing :) In terms of departures.
ologolova15445 Well, okay, just before that I could not enter the game at all, it crashed after the splash screen
I SOLVED this problem ... I have amd and the error appeared after updating the firewood to the latest version .. So do a rollback OR if you have msi afterburner then uninstall it or simply disable it before starting the game ... If you still need these methods did not help then run the game in windowed mode HERE AND EVERYTHING
I have such an error when the game is minimized, the current appears, and so everything works at a height
the same error asks to update the firewood and so the last ones stand that the current did not do it does not help just wait for patches if they help
I reduced the boost of the video card core and removed the memory overclocking by 200Mhz. A couple of weeks ago, I lifted all these values, forgot to remove it and left it, and as a result, the driver's dump in the game, nowhere else did overclocking interfere. I advise everyone to manually drop the kernel boost from 20 - 50 Mhz in any program.
The people who were able to overcome this misfortune? overclocking did not, set 30 fps, still falls :-(
wlad100
I put the old firewood 15.7.1 but the fps is a little less for that the current does not fly out like that. I put both 17 and 18 and 19 versions crashes anyway, but on these all the rules
Video card gtx 1060 6gb. Reinstalled firewood with a clean install. Removed overclocking, set the settings from the screenshots above. I installed patch 1.2. The game no longer crashes. Most likely the patch helped. In general, the crashes began after the video driver was updated.