R9 280X 3GB ASUS Does not start.
Hello everyone, I bought a card, instead of HD 7850, there is no image. I disassembled it, washed everything with alcohol, dried it with a hair dryer (about 35-40 degrees), rubbed the contacts with an eraser, the power glows green, the coolers are twisting, I connect it to the VGA monitor via an adapter to DVI (which has 4 sticks), connected it via hdmi to the TV. Atermiter AD12-B motherboard with two slots for RAM (16GB operative with one ddr4 die) xeon e52620v3 without unlock, uefi motherboard bios mode, motherboard bios BIOS version American Megatrends Inc. 5.11, 08.11.2019, with another plug everything works. I deleted firewood just like that, and deleted it through DDU. No strength anymore, what to do? (DIRECTCU II graphics card version)kurskiy
Worked, but overheated, when overheated it was cut down, my friend definitely did not deceive me.
zoNyoung
If there is no image even before the OS is loaded, then it looks like it is "dead".
kurskiy
Nowhere is there an image, a friend has it started, I have not? I think in bios
zoNyoung
And after all these manipulations, such as washing with alcohol and drying with a hairdryer, is it also started by a friend?
kurskiy
friend brought vidyuhu 100 km away from me, I will not take her back, she did not start before these manipulations.
zoNyoung
Well, what can I say, there is no possibility to check with another mother, as I understand it, and the acquisition of a "pig in a poke" can turn into such unpleasant "surprises".
I do not quite understand what the fee is for there.
if it has a second express slot, the card should be loaded into it.
I somehow had a similar story. I collected a similar pitch on x99 and stuck an old card there, but there is no image. then stuck another old card, too, then no. then the very new one stuck it worked. then I went and stuck an old card (which is express 2.0 and 1.0) into the second slot, it worked. I inserted a new card into the second slot, it did not work. collected a pitch with an old card installed Windows on Windows loading the card disconnected but the monitor may be to blame. I inserted a new card into the second slot, it worked although it did not work, but now the upper slot does not show the image. wonders. I thought this is just someone who has integrated graphics. pitch-pitch
and replacing the 7850 working at 280x pa my such an acquisition only if it got very cheap.
and so you can try to reset the BIOS. those to de-energize the pitch, remove the battery, wait a few minutes, then reassemble everything with a new card through the chdmi. all BIOS settings and settings should be reset if there is some kind of monitor port, the board should forget it, though I have a suspicion if there is something incompatible in the form of memory and the processor may be a problem to start it at all.