Friends help with the choice of the processor.
What is the best processor to put on the mother. ASUS M5A-78L-M USB3. Wanted to put AMD FX-8350 Black Edition OEM. But then he read the reviews say that he gets very hot and eats a lot.koles2015
The problem is different, in that I'm not sure that this mother will pull out this percentage at all. And if it does, then you definitely won't see overclocking on it. Overclocking the FX8000 + requires a 990 chipset. Extreme case 970.
7Rain7
processor mother supports watched tab. on the offsite. overclocking is not needed.
koles2015
Well then, he is the best for you. Better you won't put on it, maybe the mother won't cope with the harder one. You can also put 8320. You can even bring it to the frequencies of 8350 without raising the sponge. Up to 4.2 GHz for sure. In general, ideally, sell you a motherboard and wait for new processes from AMD and Intela. Look at prices + tests and already decide.
7Rain7
and the point is to take 8320 with overclocking. if without overclocking the 8350 is the same. the question is different, they say that it gets very hot 8350
koles2015
Not to say that it is straight fried, but not cold either. The meaning is due to the price, tk. 8320 without any problems at all up to 4.6-4.7 GHz to overclock.
7Rain7 is understood.
And 650 w is enough for me with a vidyuha block. 960 2GB and the price is about 1.500 more expensive than 8320
The 8350 gets to the 130W area due to heat dissipation, all the intyls are sitting in the same place, except for some server ones
for cooling the amd fart, a tower cooler is a little more expensive than some very simple one or the one that comes with the processor.
on the power supply, respectively, it is necessary to overcame the power supply limit under 140W for bad motherboards.
the block should be enough if the vidyuha is calculated tdp less than 180-240W, even if the block is very bad.
koles2015
Well, here's to you, in principle, in more detail and painted MunchkiN 616
I agree with him. About the mat. I advise your motherboard to see if the FX 8320 and 8350 are suitable So what kind of
power supply?
koles2015 Read the
reviews. It is not recommended to drive 8320 on this mother
MunchkiN 616
I noticed one interesting fact for a long time: 8320 and 8370 have the same heat pack, the maximum pressure is the same, but the frequencies are different. How so?
koles2015
If it can produce at least 400W on a 12-volt line, then it will even be enough for overclocking.
MunchkiN 616
without any overclocking and the like 8350 will work fine. and which is better for this mat. 8320 and 8350
the mother of msi970a-g43 is a budget option for FX 8350, and then msi970 gaming is more expensive, and cooling is a tower cooler with 2 120mm or 140mm valves, and there will be no temperature problems, the main thing is that such a cooler should stand up and not interfere with the memory or the block power supply, which needs at least 700W with a margin, the main thing is that during loads there is no problem of lack of power from the unit.
Zubex_XXX
Yes, I don't overclock. me that would normally work and that's it. 8350 is better than 8320E or whatever. which is better to take, I still did not understand))
koles2015
and with the block you need to look at the energy consumption of all components in total: processor, vidyuha, fan on the processor, etc.
chaos410
thanks at least someone clearly wrote)) otherwise I'm in this oak dudom))
koles2015
I told you, either 8320 or 8350. If the difference in price is close, then 8350. In fact, this is the same stone, just the 8350's base frequencies were raised initially (Consider an easy factory overclocking). Itself clocked 8320 up to 4.7 GHz with a minimum rise in springs.