ryzen 5 2600 + aorus b450 pro problem after Assembly
good afternoon.Faced with the problem!Assembled computer:CPU Ryzen 5 2600,motherboard gigabyte aorus b450 pro when you first start the computer turn on,the coolers are spinning,but no video signal just a black screen and can't go to BIOS .Tell me what could be the problem?video card msi nvidia 1060 6 gb works checked .memory corsair vengeance lpx 8gb 3000 mhzRAM in most cases. May not fully stuck. Now captain obvious include and ask the question. When you die inserted, insert the until it clicks or the plug itself is closed?)
VOVAN WOLF
and it did not help do not know what else to do I think it is necessary to flash the BIOS to the latest version
vanoseven
Try to put the monitor cable in the other connector of the graphics card, I had a similar problem. If the problem was memory or the Mat Board, the computer to reboot constantly.
Maybe I did not understand something, but you wrote no video signal just a black screen and can't do in the BIOS to go - how to flash the BIOS, is there not to get ? Unless there's a special button on Mat Board (and it is, according to PF website, no).
For starters trite to activate the Squeaker and squeak to listen to, as passed check of all components. For if there is an error - it can help. Next is to check whether all power cables are plugged in. May have forgotten to connect the video card, it happens. Try a different video output on the graphics card and the monitor. You can even outside to try to start it, because I had a case where the Mat Board in a case was not run due to the fact that there was a hairline fracture, and when the clamp screw all the cooler spinning, but the image was not (but the Board was too old, you are still new, but you never know).