Computer hardware connoisseurs, I need your advice!
Hello connoisseurs! I now want to build a compic for myself, well, such a cheap one. And I picked up a couple of components, vooooot ...Well, I'm an infusorian in this business, and I need 100% help
Here's what I picked up:
Motherboard: MSI 970A-G43
Processor: AMD FX-8300 Vishera
Video card: ASUS Radeon R7 370 1050Mhz PCI- E 3.0 4096Mb
RAM: Hynix DDR3 1600 DIMM 8Gb 1pc.
Power supply: AeroCool Kcas 600W Vooot
... I need some advice on which hard drive to take, which case to take under it, which cooler to take and what can be replaced.
And one more thing: will the power supply be enough?
Tantum
See what you can order in citilink,
54 770 rubles + 2500 delivery to your city, the case does not fit by weight until you have to cut it out of a tree without it or: D, and dig into it, but here i5 and gtx 970.
Guys, for my considerable practice, I often watched the tests, raved about intel and parrots, but having bought AMD, I never regretted it.
Tests and parrots are good, but I trust my eyes and sensations more.
Therefore, I advise, relying only on OWN impressions, and not on "mythical" tests.
snoopfrog is
cool, what) I'll drink, no problem) and what about the i5, which is the top one?
snoopfrog Just
like my assembly, only my case fits in and socket 1151 + bp is more powerful.
Tantum
These are sockets for the 5th generation of Intel processors on socket 1150, and the sixth generation on 1151. (The sixth generation is the freshest, on the 14nm process technology)
Total: 59 798r + 540r delivery = 60338r Will
you assemble a computer, install Windows yourself?
skilsaf32
Well, I think that my hands are all right, and besides, there are many, many videos on YOUTUBE ...
Tantum
Here on the last socket + ddr4. 55370 + shipping. And the corps is at home.
Here already choose, these or the option that was suggested above, but it will be differently better than i3 6100 + gtx 960 for 60k in your city.
many letters of all sorts are written the
map is very weak. finally, the radion minimum is somewhere 380x for nvidia, respectively 960
if overclocking the processor is not required and it is required because comfortable performance for fx is 4 GHz, then you can limit yourself to a cooler or the coolest one, or perhaps what will happen to the processor or what will be more in the region of 2.5k rubles. perform 10-11 zalman or arctic milling cutter a30.
memory nada 2 so that there was a 2-channel mode. without him personally, minya freezes and lags. memory is not expensive, so it is not necessary to be greedy for volume, but it is possible to sacrifice illiteracy. the most trashy ddr3 the
rest does not make sense. the case should be looked at on the basis of specific details. because the same arctic milling cutter is not included in all cases.