3 New Notifications

New Badge Earned
Get 1K upvotes on your post
Life choices of my cat
Earned 210

Drag Images here or Browse from your computer.

Trending Posts
Sorted by Newest First
f
fan of Dima Bilan 11.11.21 09:33 pm

Recommend Thermal Paste

I have a laptop, 5 years anniversary soon. I play a lot. Last time I handed it over to the service more than a year ago. This time I decided to do everything myself. I searched the internet. I stopped at 2 options - zalman and arctic cooling. Still like KPT-8 more or less, but many say that it is outdated. It is desirable that there was an opportunity to take in a small syringe, such as a disposable one.
12 Comments
Sort by:
S
SpitfireD 11.11.21

fanDimaBilan
Arctic Cooling MX-4 is not bad

E
Emir.Kazymov 11.11.21

Try a dentist.

7
7Rain7 11.11.21

Liquid metal. Coolaboreation is good, but make sure there are no contacts between the paste and aluminum.

f
fan of Dima Bilan 11.11.21

7Rain7
what kind of aluminum are you talking about? It is necessary to smear it on him.

E
Exavious 11.11.21

Take the cheap one. You will overpay only because of the + mark for 1-2 degrees of cooling ... Although, maybe these 2 degrees will solve something, go and know.

7
7Rain7 11.11.21

Exavious
-17C after LM on the video card and -12C on the process.

f
fan of Dima Bilan 11.11.21

7Rain7
Liquid metal I somehow strive to smear

E
Exavious 11.11.21

7Rain7
You probably have a 980 Ti video card and some kind of top processor?

7
7Rain7 11.11.21

Exavious
4790K and R9 290x. Another question is that my cooling is liquid, perhaps because of this, the percentage gave such an increase. In vidyah, again, too, the cooling is good, but on it I just achieved more gain. Thanks to the replacement of the standard paste with the ZhM on the vidyah, it turned out to achieve excellent acceleration without raising the valve speed to an uncomfortable level. We can say that it even turned out that now, when accelerating, the vidyah works with the same temperature and the same rpm as in the drain. And this is worth a lot - and there is no noise and growth.

E
Exavious 11.11.21

7Rain7
I do not argue, ZhM fully justifies its cost, but if on the subject, I do not think that a five-year-old laptop has a powerful video card that requires such an expense.

7
7Rain7 11.11.21

Exavious
Yes, the last time I took ZhM 1.5 years ago for 700 rubles collaboration liquid pro. Now I think the whole mower is worth it. When applied correctly, it will be enough only for 2 times per percent and 1 time for vidyahu. And so it happened with me, at first I smeared the old percent, then the new one and vidyahu. But again, there is one plus and a significant one - it does not need to be changed and over time its effectiveness only grows a little. In fact, it is ideal for scalping the scalp and for vidyah. The laptop would be cautiously smeared with her. there are usually soles - nickel-plated aluminum. Moreover, the nickel layer is so thin that it is often embarrassing.
If you haven’t seen it, this is the result of the impact of the LM on the aluminum. That's just the person in his video described that there was a thin nickel coating. With pure aluminum, everything is much sadder. I tested it myself on an old radiator.

By the way, if you suddenly decide to use it on vidyakhe - I will give advice. There are small conduits around the chip. It is better to cover them with ordinary thermal paste, tk. God forbid, you get caught during work - vidyahe khan, t. she conducts current with a bang. And so he smeared it with a thin layer of ordinary terpomast and you can be calm. When scalping a probe, I advise you to do the same.