What's so cutting the graphics ??

do not_cut_graphics
No Syndicate no post screenshots from GTA 5 with a good view of the detail somewhere on the roof or with a view from the plane

do not_cut_graph
It is desirable that all modules are the same and stand in pairs (2, 4, etc.), except for motherboards using 3 and 4-channel modes - there you need 3 and 4 modules, respectively. Check any prog that can show the state of mind:
Spoiler


Denxxx 777
... the day before yesterday bought a gtx 970 and nothing has changed ...

It is more detailed - when rearranged Windu (before or after changing the video card), if the game itself rearranged (it could stand and not in the system partition), did you change the graphics settings in it, etc. ?

... Directx and install all programs at once ...

You need to install only those programs that you need at the moment - you will install the rest as needed.

Denxxx 777 I
used to have gtx 750 the day before yesterday I bought a gtx 970 and nothing has changed !!!

Strange, I have the same vidyaha. There are no problems.

nickSIA
and more than once .. and the Windows just changed there is no difference

SonyK.
So I have a dual cannel memory mode .. The settings are all the maximum and set the minimum there is no difference, all textures are drawn slowly .. If you come a couple of meters, objects appear, you move away, they disappeared .. I changed the wind before and after I set the effect to zero .. What else can be responsible for drawing ?? On another motherboard with a different process, I tried nothing .. the power supply changed nothing .. I only changed hdd and memory

Denxxx 777
screenshots from GTA 5 with a good view of the detail somewhere on the roof
Spoiler

Denxxx 777
PSU does not affect the drawing range, but the HDD can load slowly, especially if it is not fast itself.

PS Learn to hide pictures under the spoiler - reading a topic with open ones is not so convenient.

SonyK.
I just wanted to write to him that 6300 is a piece of feces and cannot open a 970 card - she needs an i5 with a 3.5 GHz frequency

burn the console
At first there was a conversation about the GTX 750 - its FX 6300 should reveal. But how with the GTX 970 I don’t know - he wrote about it later.

SonyK.
HDD WD blue 1TB is not yet a year old..Victoria program checked 165 orange blocks what is this ???

Denxxx 777
... WD blue ...

Well at least not Green ...
If you installed the swap file on it, there may be slowdowns.
5 years ago I bought my HDD - I immediately took WD Black (they are faster). But all the same, over time, I bought an SSD for it - a system and games for it, all data and game installers on the HDD. I turned off the paging file - with my 16 GB of RAM, I really don't need it.

... 165 orange blocks ...

I don't remember which blocks by color - but I saved the data (tested in August 2015):
Spoiler
But I have an old "screw" - if anything is forgivable to him ...;)

SonyK.
just played in gta drawing in general the tin of the car sharply in front of you there are stops on the side of the road, too, even it happened a wall appeared out of nowhere ????

Denxxx 777
Show all the GTA settings on the video - upload it to YouTube and insert it here, we'll see. It is advisable to shoot with MSI Afterburner - the loading of system components will be visible if the program is configured correctly.

Denxxx 777
Yes, you can finally post screenshots with loading system components - to understand where the weak point is? MSI Afterburner or PlayClaw5 to help you.

Denxxx 777
When you wake up testing everything on Ultra, turn on 4x MSAA anti-aliasing, that's the only way I managed to load 970 at 99%.
Spoiler




As for me, my system is balanced enough despite the passing years.
Spoiler

nickSIA
Yes, there are no failures, I tested and when I had 750 there was a problem in all the games around you, the area where everything is drawn and then the ladders are bad shadows and detail

problems of soap textures can be pitch 2
peka-first on amd this is a bug of the memory controller when the memory is not working well and the processor is working unusually slowly, especially because it loads textures slowly. I have come across such a boogie at home and I must say a very unpleasant phenomenon.
The second problem is the lack of GPU memory. There should always be more memory for the GPU than the game can basically eat and even try to fix it.
Taken together, this gives a very specific mixed graphics experience even at normal fps.
http://pix.playground.ru/dragon_age_3_inquisition/1064476/
http://pix.playground.ru/dragon_age_3_inquisition/1064475/
this does not particularly apply to ossossin, but for the sake of fidelity, you can twist everything in the draver to the highest quality ultramax without smoothing. The lod there is very soapy and not of high quality. I have a screen where I got a house whose roof is not protected by a beam in a lod. and all the quality on average is. peck-peck-peck

on 970 ke such problems did not arise, but quite a long time ago, if in the wood the graphics slider to the maximum to the right stood such crap.

nickSIA
Here's a look at my screenshot with max.graphics true msaa 2x but I had a better graph on a worse vidyuhe with minimal salaries .. By the way, enlarge my picture what are these points in the distance

Spoiler is my
Spoiler is yours

MunchkiN 616
Yes, but I don’t have enough GPU shortage .. but about the controller, you really came across this, too, the textures were loaded from nowhere and quickly .. and what did you do, how did you solve the problem ???