Redline: tuning and tuning engines (Street Legal)
Guys, did you know that in Redline you can change gear ratios in the gearbox? And also change the engine speed? Just double-click the SCREWDRIVER on the gearbox or cylinder block!With the checkpoint, everything is clear, but how changes in revolutions affect acceleration, etc., write down who's taking it.
And by the way, how many times have I asked how to put a supercharger and a hood (air intake) on the MC GT and can I put NOS ???
Good people help someone with what ...
What could be? patch v 2.1.4 stands and on top of it v 2.1.5 do not lie down !!!
What could be?
Help me please...
go to the site slrredline.narod.ru there is a patch 2.1.4 2.1.5 2.1.6 2.1.8 2.2.1 and NOCD to all those listed.
Ps v2.2.1 includes v2.1.9r4 r5 r6s like
I have howlers super duti 100 km / h for 0.809 seconds
200 km / h for 1.923
seconds 1/4
mile for 5.045 seconds 1 mile for 15.320 seconds
maximum speed 540 km / h and above ...
dudes a problem: I saw a hood with a cutout for MC_GT and then there is a chip like a nano-injector (just under the cut-out)
, I don't put it on something (I tried to pull the supercharger out, and cleaned it up, it's okay anyway) version of the game 2.3.0 Live Edition
Guys here you are making engines with 1000 hp. and more. Please write the assembly, otherwise I ride like a fool on a dolt and I can’t screw anyone up and I’m sitting in a green garage for 100 days. Help. I’ll be grateful! Write the assembly to [email protected]. Thanks in advance!
Einvagen 666 hp (hp) (own assembly) (PATCH 2.2.1 (English) without fixes and add-ons).
body: GT 110
-Einvagen PerPro GTA Block
-Einvagen PerPro GTA Crankshaft
-Einvagen GT Crankshaft Bearing Bridge
-Einvagen Oil Pan
-Einvagen 110 GT / PerPro 140 GTA Connection Rods
-Einvagen 110 GT Pistons (for $ 291)
-Einvagen Alternator
-Einvagen PerPro GTA Cylinder Head
-Duhen DVC Intake / Exhaust Camshafts
-Einvagen GT Camshaft Bearing Bridge
-Einvagen PerPro GTA Cylinder Head Cover
-Einvagen GTK Supercharger
-Einvagen supercharger Drive Belt
-Duhen SolarTunnel intake manifold
-SL Tuners 4 Channel Methanol Injection Fuel Rail
-SL Tuners 4 Channel Ported N20 System
-Einvagen PerPro GTA Camshaft Drive Belt
-Einvagen supercharger drive belt
-Einvagen PerPro GTA 6 Speed ​​Street Transmission.
-Einvagen GTA Transmission Center Diferential (4WD)
-Baiern Devils 65Fi 3.6 Flywheel
-Baiern Kraftwerk 2.5 Clutch
I draw your attention to the fact that we DO NOT set the Exhaust header at all, because. This gives a couple of dozen horses.
Tuning:
-Duhen DVC Exhaust Camshaft: -14
-Duhen DVC Intake Camshaft: -13
-SL Tuners 4 Channel Ported N20 System: 359.0
-SL Tuners 4 Channel Methanol Injection Fuel Rail: 16.00
-Einvagen PerPro GTA Block: Idle 850rpm, Redline 10000 -12000rpm
acceleration 0-100: 1.619 sec.
0-200: 3.514 s.
maximum speed: 420 km h
kindly request, upload your recipes, settings, chips, and not write what is your secret, in the hope that your records will be of global interest to someone)
Advice: after tuning the car, I noticed that the car began to behave very unstably on the road. Noticeably eliminated this problem by lowering the tire pressure to a minimum (with a screwdriver we poke on each wheel and release the pressure to the left until it stops).
hello guys, how do you like this option VAZ 2112 1066 horses 536 H / M rear-wheel drive :)
dudes a problem: I saw a hood with a cutout for MC_GT and then there is a chip like a nano-injector (just under the cut-out)
, I don't put it on something (I tried to pull the supercharger out, and cleaned it up at all, still nothing) game version 2.3.0 Live Edition
put the supercharger , then the carburetor, then in the engine details you take the air intake and put it on the carburetor
People tell me such a setuevina - I bought a dvenashka, assembled the engine, only Inline 4 was suitable, I took the most expensive spare parts, in the end it turned out to be 250 hp. BUT, before that, I bought a shabby Evo 8 in the parking lot, the engine is the same Inline 4, almost all parts that you can see are identical to mine (except for the gearbox and the cylinder block cover), and the power is already 720 hp. Share the secrets of how to squeeze such power from the engine.
Build 2.3.0 NF 2010
I figured everything out, it was easier to buy an already assembled engine. It turned out even more powerful.
Can you tell me if all versions (including the latest Redline) will work on this laptop? What is more important for this game so that it does not slow down (video, processor ...)?
Acer Aspire 8930G-944G64Bi
Specifications:
Intel Core 2 Duo T9400 (Clock frequency (MHz): 2530, Bus frequency (MHz): 1066, Cache: 6 Mb)
DDR2 4096 Mb
Video Chipset: NVIDIA® GeForce ™ 9700M GT Size (Mb ): 512
A friend tried to run the last one on the Redline laptop and did not go ... the laptop costs about $ 1000 HP 2 cores, but the video Radeon is really worth it ....
He still has a stationary old computer and it went on it, but with "brakes" .. 512 video, 1GB of RAM, P4 1 core .... Why, on a newer one, it did not even start, gave an error 3D device?
people tell me I bought a dvenashka what engine parts should I put on it so that it starts ?? otherwise I collect but no sense