CPU and GPU load. (Fallout 4)
In general, it dawned on me that the game was sagging to unplayable values, I decided to see what's what, downloaded msi afterburner and saw that the game was weakly loading percent and vidyahu. I made a random screen with a drawdown. Vidyashka is loaded by 60%, by 22%, by 22% Karl! Settings for ultra, anti-aliasing off, depth of field standard. Gentlemen, what can you advise?Spoiler
![](http://img.playground.ru/images/0/6/2015-11-16_00001.jpg)
nestrbob
By the way, you could turn off one chip and test in such a mode so that 1Ren could roughly imagine what kind of performance it can count on.
nestrbob
does not add up her memory.
she has tested 256 bits for each chip and each module is allocated for one of the GPUs.
do not mislead the bakers.
purely hypothetically, it can and will be able to use all the memory on dx12, but then its bandwidth of set 2 will drop to the bandwidth of the line through which the memory is connected and the type of the south bridge that replaces the bridge and divides the 16x express in half. what is it for.
EvgenyDMT
if you disable one chip (by default, if it does not work yet) it will be somewhere around 25-30 fps per full HD and all the maximum screen anti-aliasing through the driver. And moreover, I did not test locations where there are potentially many NPCs, objects and more load on the cpu.
in a forced mode, however, I will have 60 fps and the loading of the card and both chips is almost on the ceiling, but there will be artifacts. so I started running the game with the logo nv in the background included in the driver. this reduces the efficiency of the slime.
and if the GPU memory is not enough, it can be up to some limit to compensate for the good bandwidth of express and cpu memory.
and if the screenshot is repaired 1Ren is repaired somewhere in the city, I also have 30fps there. however, I do not monitor what exactly slows down, but I can say that the fx6100 is 70 percent loaded, which is almost the ceiling for it due to the peculiarities of the turbo mode.
Not with everything on the topic, but if you pulled the game from the torrent! In the network there is a certain nit under the nickname Seyter. So, this grief repaker is not only stuck in the 90s and believes that pinching the video / audio quality is clear. So he also builds miners into his repacks, one of them is in the fall repack. If someone installed this shitty repack, the Miner is located along the path C: Users your name AppData Roaming System. It is activated five days after installation covers vidyuhu and percent.
Download the TechPowerUp GPU-Z program, see the percentage of the graphics core load
Uuuh wrote off topic here :)
In general, things are like this. I put ENB, ran for 4-5 hours, subjectively it became smoother, a little lower in frames than without it. I found a lagging segment, in it that is with ENB, that without a side. With GPU-Z, the GPU load readings are within 90% (in the lagging area), the percentage rarely exceeds 20%. Turning off the sun's rays and bokeh helped a lot. I do not have a swap file for two reasons: 1) I have an SSD, 2) 16GB of RAM is being taken out. I play in a full-screen window, in the driver settings I turned on half adaptive synchronization, which would cut the frame rate up to 60 fps, tk. problems with terminals (monique 120 Hz). Jerks remained, but not critical. I play on a stimovskaya litsuha.