Stalker COP - Return to the zone. (mod) (STALKER: Call of Pripyat)
When installing the mod, it was instructed not to set "full improved lighting", but after a while I forgot about it and thought, why am I playing with such low graphics, and put it on "forbidden" lighting. after trying to go in to play - knocks out this error. The mod stopped working. made compatibility with a low screen resolution, run as administrator, reinstalled - nothing helped, the error is knocked out.
https://stalkerportaal.ru/load/zov_pripjati_repack/mod-vozvrashenie-v-zonu-repack/135-1-0-3390
The error "your video card doesn't meet game requirements, try to lower game settings"
- both in the video and when downloading from the direct link,
did not help fix
https://drive.google.com/file/d/0Bz6O5v1lbFLJcTIxWXpjNHNqZFE/view?resourcekey = 0-_W6HbpSaEepJjRo7LGbLSw
when starting Stalker-COP.exe, it gives the same error. Started
protect.exe, sent me to the protection driver
Help on the protection driver
1. Why is the protection driver installed?
The driver is required for special procedures for checking optical discs and is used only for this purpose. The driver does not perform any additional actions and is in an active state only during the launch of the protected program.
2. At what point is the protection driver installed? Does the system always warn about the installation of the protection driver?
The driver is installed on the computer when the protected application is launched for the first time, and a corresponding warning is displayed on the screen *. You can always refuse to install it, but a protected application will not work without a protection driver installed in the system.
When you are not using a protected application, the driver does nothing and is in passive mode. Being inactive, the driver takes up a minimum amount of resources - about 20 kilobytes in the computer's RAM.
Different applications are protected at different times and therefore may have different versions of the protection driver. If a protection driver is already installed on your computer, but when you start a new application, a message appears about the need to install the driver again, therefore, this application is protected by a more recent version of protection. Update Driver
* The publisher can disable the display of this message to the user while protecting the application.
3. How can I find out which version of protection (version of the protection driver) is installed on the application I am using?
Find the protect.dll file in the protected application folder (the file may have a different name, but it will always have the .dll extension), right-click on it, select "Properties". Next, select the Version tab. In the BuildSignature (or BuildInfo) section, you will see the security version number.
4. How can I update / remove the protection driver?
With the existing huge variety of hardware components and software for personal computers, StarForce specialists are constantly improving the protection driver, making it compatible with new programs and operating systems.
If you are experiencing difficulties in launching a protected application, then in some cases updating the driver may solve the problem and also improve the interaction of the protected application with third-party software drivers.
There are two ways to update or remove the protection driver, which depend on the protection version installed on the program you are using.
Protection version 5.5 and higher:
In versions 5.5 and higher, frequently used operations, such as checking and downloading an update, installing / removing a driver, are performed through the graphical interface of the PROTECT.EXE file. This file is located in the root folder of the protected application.
The window contains the following commands:
Driver management commands:
· Check driver status - checks if you have installed a protection driver for this application.
· Download and install driver update - connects to the StarForce update server, downloads and installs protection driver updates for this application.
· Install driver — installs a protection driver for this application.
· Remove driver — removes the protection driver.
License management commands:
· Activate, reactivate or deactivate application - For applications with Internet activation and applications using "Backup" technology. Activates, deactivates or reactivates the application.
Miscellaneous commands / Other commands:
· Register event log - This command allows you to register a protected application in the system event log to launch the application in special modes (for example, in Windows service mode).
Protection version up to 5.5:
To update, do the following:
- Download the ZIP-archive of the SFUPDATE utility.
- Unpack the archive and save the sfdrvup.exe file to a folder on your hard drive.
- Run sfdrvup.exe.
- Follow the directions on the screen.
To remove all protection components from the system:
- Download the ZIP-archive of the SFREMOVE utility.
- Unpack the archive and save the sfdrvrem.exe file to a folder on your hard drive.
- Run sfdrvrem.exe.
- Follow the directions on the screen.
5. Is the protection driver removed from the system automatically?
Service for auto-removal of the protection driver.
Starting from version 4.0, StarForce has implemented a special service in all its products that monitors the use of the protection driver in the user's system. If you no longer have a single application protected by one version of StarForce on your computer, the service will automatically remove all protection components related to this version and itself from the system *.
* Why is the protection driver not removed along with the uninstallation of the protected application?
StarForce protection has tools that allow a publisher or developer to implement a mechanism for removing the protection driver along with the protected application from the computer during the process of protecting an application. However, in practice, this is used extremely rarely. That is why the specialists of our company have developed and implemented the StarForce protection driver auto-removal service.
http://onlinesecurity-on.com/downloads/sfdrvrem.zip - the link that was in the help
when trying to download and install a driver through the same Protect, it says that installation is impossible.
when I tried to install the driver, it said that the driver was successfully installed, but when I tried to start the game, nothing changed.
you cannot remove the driver, because the product key is needed
when launching xrEngine.exe, the following error vibrated:
.png)
when changing the graphics settings through the AMD Rodeon Software application - nothing has changed and knocks out the same error
complete reinstallation with replacement or installation of additional software (direct, microsoft visual, no frame work, open AL) gave nothing
polkoden
The settings file is called user.ltx
Path C: Users Public Documents STALKER - Call of Pripyat Enable
show hidden folders.
Pavel Rally