Problem with rx 460
Long ago bought a PowerColor rx 460 and got crashes games... After entering the game vidyuha only works for 2-3 minutes, and then graphics driver has stopped responding and so on. The problem is solved by lowering the frequency to 850 on the core and 1500 on memory that I do not a bit not satisfied, because I cut the map as much as 30%.All I can hope for voodoo with none, because I am sure that the problem is with the software. in MSI kombustor I hit none and the factory and even at the overclocked frequencies, and it worked steadily. tried to reduce and increase the power and voltage, but nothing helped. The wood is fresh, the Windows 10.Update the topic that I already wrote tips, because the PROBLEM is SOLVED by OVERCLOCKING the PCI-e
Hello! SOSS!!!
Putting together a new PC. decided to start with the video card.
Bought the RX 460 graphics card 4gb asus.
Materinka asrock g31m-vs2(old)
The Xeon processor e5450 (old)
4gb ddr2 ram (old)
Loading Windows and then the even screen. Or just the logo of Windows will be displayed. Everything, nothing more. What could it be? I don't know what to do! I have updated BIO. I checked the video card on another PC - it works. There the components were newer. Can anyone come across?
tolik.31
try to start with the same CPU but a different motherboard, most likely the problem in it. support only ddr2 is already too old story)
tolik.31
Problem, the BIOS firmware to the Mat. Board it's all about . I failed to do a clean install from USB drive - downloaded from the official site, did everything according to instructions and the result is zero, only worse . In the service center flashed as it should . In your case, it is difficult to undertake such a manoeuvre to do a clean install vindovs with flash. When to turn on the computer. the flash drive must be inserted in USB. even if the firmware is not the same, then it should work.
vpn1992
Well of course you perverts. VGA I don't even remember what year 98-zero, now in 2к17 th...
If the black screen is predlojenie informed that the monitor was connected to the motherboard to the built-in map, actually inserting a new card and plugging in the motherboard did not understand that she is stuck and runs in normal mode on your card, just try to insert into the connector on the motherboard, and then to draw conclusions.
tolik.31
Most likely similar to the mother thinks that the output goes through the built-in vidyahu, alternatively start on strooke and UEFI switch on the PCI slot.
Zewer
1 - I bought none in the summer of 2016
2 - I do not see anything funny in the acquisition of products PowerColor
Poebloshek
only for the sake of this answer, I registered here.it is in the diet and the problem with this card,if it has no additional power.it's simple-PCI-E 3.0 lines below, it lacks supplied from the power slot,and therefore failures,crashes,reboot way more often reload on the go.I have she is on the computer H55,my first thought was that he bought a marriage,and then when I realized that it was not the fact that 3.0-1.1 works for me,I just got in WattMan and lowered energy consumption by 15%-all works perfectly.plus coolers have podesigned because she was a little hot during active use.so it is necessary to begin to understand the issue,and then scream that all around stupid,one author of the post smarter than everyone
Nicholas Ololi
by the way firing quite well collected.they have rules and components and the cooling on the cards is good.we have a summer that is pilitowska graphics suffer mining-that are suffering because of +42 in the shade and only the a / C saves you from this hell.Gigi overheat,to disperse the cooler is necessary,ISI is the same,ASUS is heated and burns at stock speed runs easily
Poebloshek
by the way some producers have the option of desoldering a 6-pin on the graphics card,whether only there is the effect of this-the question is still the same
now, in principle, this graphics card allows and the tanks full to play and pamineti,though, the little things.but given courses,3 of these cards give me the local 30K per month and the cost of the light about 2.5-2.8 to
Poebloshek
colored at Sotaka go for quality-the same cal,just under a different brand.Assembly and components there and there absolute rubbish
Alex666777
if you better read the forums, I noticed that some additional power cards are issued by failures. and Yes, lower frequencies, lower energy consumption - a figure you cut, and there is no matter in what ways. if we want to continue to insist on power - insist, I'm basically on the drum.
Poebloshek
Yes, health.put it in the slot v 3.0 and you will be happy without cutting and lowering.and then you can continue to talk about its bugs,lags,about the blade chip and everything.if you used R9 290 and above,you would understand that the power from the slot is also very Rola video card
Poebloshek
If you have АМ3+ percent, that is the motherboard for 2K bps connector third version)
Gigabite RX 460 4gb without additional power supply, bus PCE-E 2.0 16x... constantly crashes the driver and hung WattMan solved quite simply without overclocking the bus or lower the frequency of the video card... I reduced the core voltage GPU frequency 1214MHz to 1000 mV and previous to 980, 970, 960 mV... the Result: everything works without problems, the frequency became stable and remains on 1214MHz without subsidence, in the Heaven benchmark on extreme sports the final FPS was 4 of the frame above and 66-67 degrees is not hot at all no matter how it drove. I had the problem as I understand it in the initially overestimated the power of the GPU kernel, I hope someone can help.
Alsvet
Dude, and the voltage should be reduced only on the GPU or memory too? I have the same card is only 2GB, the driver takes off with the artifacts, the voltage is 1000мВ on the processor and memory.