Temperature of xeon 1270 v3 processor
I took the processor, started checking and noticed that the core temperature reached 85 degrees (only one core, a couple of times it was like 87 wrote, but it was right for one second, after, it immediately dropped to 78-83) at 100% load, and on the lid, about 48, and the temperature spread itself is quite small between the cores, this is not the norm, right?
In idle time, it didn’t go anywhere else.
Is this normal or should this not happen? I just don’t remember the norm anymore, in my opinion, even the cores should not be more than 80 degrees. There were no errors, blue screens, throttling during the test
perhaps the problem is that the cooler is wrong bad stupid. the fact is that thermotubes cannot always work at any angles, which can lead to a sharp loss of heat removal efficiency under loads, so it’s reasonable to install a cooler normally so that it stands even if there is some kind of Zeon board, but there, on my current, the memory is not usually there for servers.
or the problem is something else. but the fact that the problem is in turboboost if, as it is said, that the processor is tdp 80 and the cooler with tdp is most likely 120-130 if not more, then as far as I know, in theory, the processor should not go beyond tdp and roughly speaking, if the cooler was back to back on tdp, it was still there would average temperature 50-70 simple load.
MunchkiN 616
I now have a 4570 processor installed, they have almost the same crystals, I don’t remember one of them is stupidly a little larger. 4570 is generally hotter, xeon - 80, and 4570 - 84. I pressed the cooler with decent force, from 83-86, it dropped to 77-80, but the difference with other cores remained at 15-20 degrees, this should not be , and still periodically jumped over 80 + tried another, but in my opinion it is either the same or even weaker. After, as soon as the cooler was not installed, both down and to the side, there was no difference, even in my opinion, the indicators became worse somehow. When I assembled the computer in 2013, I don’t remember the name of the cooler, but I took it as a reserve for the top. If you now turn off the cooler on the 4570, it will also heat up, but up to 100 it will do it evenly
MunchkiN 616
I have already sent him back to the seller, I hope for the conscience of the person and the money will be returned to me, according to the conversation, he is quite an adequate person. When it returns, I'll order another one elsewhere, and then we'll see. If everything is all right with that, I’ll write it off here, for anyone there are people with the same problem and many of the tips that were left to me here will be useful to them, no matter what platform they have. But it won't be soon
Well, that’s all, the same processor arrived, didn’t change anything, just inserted it and everything worked as it should, so the problem was in the previous processor, and not with me, check the processors, tested for up to 15 minutes, never the readings are higher the norms did not rise, the temperature of the cores is uniform
condolences to those people who take xeons. They don’t understand how they work. They also ask questions on the forums with words help)))).